Introducing the KAM Designs/Venomous Designs Evo V2 Foregrip.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • cougar20th
    Registered User

    • Sep 2002
    • 2330

    #1

    Introducing the KAM Designs/Venomous Designs Evo V2 Foregrip.

    Introducing the KAM Designs/Venomous Designs Evo V2 Foregrip.







    If these look familiar there is good reason. I have worked a deal with Venomous Designs to license and reintroduce their product line.

    These were never produced in the past. These parts are machined off the original 3d models from years past.

    This is a one-time run and will be the last time these are made. I will consider them retired after this run. So get them while you can.
    • The parts will be the same Quality as you would expect from VD or KAM Designs
    • You will be dealing solely with me. You will be paying me. I will be using my suppliers. I will be inspecting and shipping the parts. Everything will be dealt with solely by me.


    Finish: Raw

    Total price will be $125 +Shipping (USPS small flat rate)
    • $75 Payment to secure your foregrip due now.
    • $50 +Shipping due upon completion.
    • Absolutely No refunds. Unless the project falls thru then full refund will be made.

    Time frame to Production Start: February 1
    Completion: Spring 2021
    Post then PM me for payment info. I will then send over a paypal invoice.

    Include: Both in PM & Payment notes: Your Address, your screen-name, Which forum, Also please include KAM/VD V2
    I will be producing as many as are ordered.
    I will be letting the preorder run until production starts.

    The List
    1. SSP Reaper - Invoice Sent – Paid in Full
    2. Nobody - Invoice Sent – Paid in Full --- Shipped
    3. Anthony w Lawrence - Invoice Sent - Paid in Full --- Shipped
    4. alpha_q_up23 - Invoice Sent – Paid in Full --- Shipped
    5. alpha_q_up23 - Invoice Sent – Paid in Full --- Shipped
    6. jbtamu1011 - Invoice sent – Paid in Full --- Shipped
    7. Armageddon - Invoice sent - Paid in full --- Shipped
    8. Walking Stick - Invoice sent – Paid in Full --- Shipped
    9. Bunny - Invoice Sent - deposit --- Shipped
    10. Bunny - Invoice Sent - deposit --- Shipped
    11. Zondo - Invoice sent --- Shipped
    12. available
    13. available
    14. available
    15. available (Last one) available from me.




    I will put up a drawing with overall size and mounting dims shortly. So people can plan their projects.
    Last edited by cougar20th; 04-26-2021, 01:54 PM.
    Originally posted by dano_____
    I keep forgetting to not feed my mags after midnight so they seem to multiply regularly.
  • SSP REAPER
    FKC Founding Member

    • Aug 2008
    • 1831

    #2
    Oh twist my arm sign me up.

    Comment

    • Nobody
      Nobody's Perfect
      • Oct 2001
      • 3384

      #3
      More crack to a crack addict.

      Yes i will take one

      Comment

      • zondo
        One of 8 bosses... again.

        • Dec 2006
        • 2245

        #4
        Wow, these came out great!
        Stay Classy, AO...
        BEO: RIP / Topgun Paintball: RIP / Old MCB: RIP

        Comment

        • cougar20th
          Registered User

          • Sep 2002
          • 2330

          #5
          Originally posted by zondo
          Wow, these came out great!
          They did, I had two prototypes made. The guys at Reaperball got to see one of the prototypes. Everyone had good things to say about it. How it felt and looked.
          Originally posted by dano_____
          I keep forgetting to not feed my mags after midnight so they seem to multiply regularly.

          Comment

          • Anthony w Lawrence
            Registered User
            • Sep 2015
            • 114

            #6
            Put me down for one

            Comment

            • cougar20th
              Registered User

              • Sep 2002
              • 2330

              #7
              Invoices sent to all on the list at this point.
              Originally posted by dano_____
              I keep forgetting to not feed my mags after midnight so they seem to multiply regularly.

              Comment

              • cougar20th
                Registered User

                • Sep 2002
                • 2330

                #8
                I hobbled together a gun to show what the V2's look like on a gun. Sorry its a mixed up gun.



                Originally posted by dano_____
                I keep forgetting to not feed my mags after midnight so they seem to multiply regularly.

                Comment

                • jbtamu1011
                  Registered User

                  • Aug 2018
                  • 449

                  #9
                  get me one, cougar!
                  JB
                  Aggie Class of '09

                  Comment

                  • RossT
                    Registered User
                    • Sep 2009
                    • 82

                    #10
                    Do you know if these will work with a Nummech frame with the deep trigger guard?

                    Comment

                    • cougar20th
                      Registered User

                      • Sep 2002
                      • 2330

                      #11
                      Originally posted by RossT
                      Do you know if these will work with a Nummech frame with the deep trigger guard?
                      I have not held a Nummech frame.

                      As long as a Nummech frame stops at the same front to the triggerguard as a AGD Intelliframe or AGD Xframe (along with a multitude of others) and you use a RT length rail then the grip sides fully infront of the frame. See the sample picture above thats a xframe and RT length rail.

                      Something like a old logic frame that they moved the trigger guard forward it would not work without modification (Trimming the back off the foregrip).
                      Originally posted by dano_____
                      I keep forgetting to not feed my mags after midnight so they seem to multiply regularly.

                      Comment

                      • Apathetic_Chaos
                        Registered User
                        • Mar 2017
                        • 229

                        #12
                        Is it possible to get one either without the screw holes or with them moved forward? I really want to fit one on my 2K9 front end

                        Sent from my SM-G981U using Tapatalk

                        Comment

                        • cougar20th
                          Registered User

                          • Sep 2002
                          • 2330

                          #13
                          Originally posted by ConradCustoms
                          Start 2021 off with a new mag build! Now through the end of January 2021, if you combine your purchase of this frame with a preorder of either of Cougar20th's new products (V1 Snatch Grip or Evo V2 Foregrip) coming out and get a $25 discount off your M86V2 Frame purchase. Will just need to confirm your pre-order deposit to apply the discount.
                          So the guys over at Conrad Customs are running a special discount.
                          Order a snatch or foregrip, order a M86v2 (in stock). Let them know your taking advantage of the discount and they will contact me to verify.
                          Originally posted by dano_____
                          I keep forgetting to not feed my mags after midnight so they seem to multiply regularly.

                          Comment

                          • Armageddon
                            Registered User
                            • Feb 2020
                            • 10

                            #14
                            I am down for one. PM sent thanks

                            Comment

                            • Bunny
                              AO Archivist

                              • Mar 2002
                              • 3452

                              #15
                              Hey! Put me down for (2). Thanks!

                              Comment

                              Working...