Hi All,
I figured there could be enough new faces or unfamiliar faces that I'd just do a little intro again. Conrad Customs, LLC is just a little hobby shop that works in collaboration with mag enthusiasts for mag enthusiasts. Conrad Customs has a special collaboration with KAM Design and XMT, as you might notice since we stock KAM's M86 V2 Frames, and some of the VD re-run components. Our business is completely self-funded and sale-sustained, all proceeds get dumped right back in to making more cool stuff. We hope you like what is yet to come, and we are definitely excited about being able to offer more parts to this community.
Below we will update as much as we can with our current offerings at www.ConradCustoms.net and can be purchased either directly by PM'ing us here or through the website itself.
CC Thrasher Rail
Color Offerings:
Raw Polished $160 + Shipping
Gloss Black $169 + Shipping
Dust Black $169 + Shipping
Specs:
Full length(E-Mag/ULE Body length rail)
Internal ULE Milling
Front foregrip slot, machined to accept 1/4"-20 screws (for the VD V1/V2 Foregrips)
Rear accessory slot, machined to accept 10-32 screws (Matched to original RPG Snatchgrip hardware. Recommend Drilling the slot to 1/4"-20 if VD Snatchgrip use is desired)
Accepts and uses RT Pro/E-mag Sears (Not included.) Uses standard Searpin length.
Weight: < 3.9 oz
CC OverShadow Rail
Color Offerings:
Raw Polished $95 + Shipping
Gloss Black $125 + Shipping
Specs:
Full length(E-Mag/ULE Body length rail)
Internal ULE Milling
Front foregrip slot, machined to accept 1/4"-20 screws (for the VD V1/V2 Foregrips)
Rear accessory slot, machined to accept 1/4"-20 screws (for VD V1 Snatch Grips)
Accepts and uses RT Pro/E-mag Sears. Shortened Searpin included with Rail purchase to accomodate narrower rail.
Weight: < 3 oz.
KAM VD EVO V1
Color Offerings:
Raw Polished $145 + Shipping
Gloss Black $145 + Shipping
Specs:
Flat top milled for RT Pro rails
Machined for Gas Thru Foregrip functionality. 1/8"-NPT threaded on bottom and both sides.
Bolts to rails with two 1/4"-20 screws.
KAM VD EVO V2
Color Offerings:
Raw Polished $145 + Shipping
Gloss Black $145 + Shipping
Specs:
Flat top milled for RT Pro rails
Bolts to rails with two 1/4"-20 screws
KAM VD Snatch Grip
Color Offerings:
Raw Polished $45 + Shipping
Gloss Black $49 + Shipping
Specs:
Snatch Grip for RT Pro rails
Machined from 6061 Aluminum
Bolts to rails with one 1/4"-20 screw.
KAM M86 V2 Frame
Color Offerings:
Gloss Black $250 + Shipping
Specs:
Gloss Black Anodizing (Triggers came out more semi-gloss).
AGD Spec where it counts. Twistlock friendly. AGD Safety compatible (not included)
Pneumag Capable (Mounting for Fabco MSV-2 & Clippard MPA-3, Tapped for Sleeper LPR mount Capability.)
Frame accepts 2X E-mag trigger magnets above the forward trigger stop.
Magnus Sabre Trigger included, Forward & back stop setscrews. (Chaos Trigger can be swapped for additional $25)
Aluminum Grip Panels included.
Magnus Sabre Trigger
Color Offerings:
Gloss Black $35 + Shipping
Specs:
Includes Forward & back stop setscrews
Fits most frames that accept AGD spec'd Triggers (Intelliframe, X Frame, RPG Tritons, RPG ULE Intelliframe, RPG Chimera, Magnus M90, VER frame, various Lc Frames)
CC Chaos Trigger
Color Offerings:
Raw Polished $45 + Shipping
Gloss Black $49 + Shipping
Dust Black $49 + Shipping
Specs:
Slightly wider design, similar to an Emag trigger
Includes Forward & back stop setscrews
Fits most frames that accept AGD spec'd Triggers (Intelliframe, X Frame, RPG Tritons, RPG ULE Intelliframe, RPG Chimera, Magnus M90, VER frame, various Lc Frames)
CC Fluted Gas Thru Foregrip
Color Offerings:
Raw Polished $45 + Shipping (1 of these available)
Gloss Black $49 + Shipping (Restocking)
Add $7 for an Inception Designs Straight Macro Fitting
Specs:
Gas Thru vertical foregrip that screws into RT Pro and AM/MM Vertical ASA's
Machined for Gas Thru Foregrip functionality. Recessed 1/8"-NPT threaded on bottom (Fitting Optional)
CC Twisted Gas Thru Foregrip
Color Offerings:
Raw Polished $54 + Shipping (1 of these available)
Gloss Black $59 + Shipping (Restocking)
Add $7 for an Inception Designs Straight Macro Fitting
Specs:
Spiraled/Twisted for your pleasure
Gas Thru vertical foregrip that screws into RT Pro and AM/MM Vertical ASA's
Machined for Gas Thru Foregrip functionality. Recessed 1/8"-NPT threaded on bottom (Fitting optional)
CC SubZero Feedneck Smooth
Color Offerings:
Gloss Black $60 + Shipping
Specs:
Angel Threaded
Smooth Feedneck Band near bolt locations
Clamps feednecks using 1/4-20 socket head bolt
CC logo'd
CC SubZero Feedneck Notched
Color Offerings:
Gloss Black $60 + Shipping
Specs:
Angel Threaded
Notched Feedneck Band near bolt locations for added flair
Clamps feednecks using 1/4-20 socket head bolt
CC logo'd
Any deals on the website currently (Buy a rail, get a discount on a VD Foregrip, or Buy an M86, get a Shadow rail discount), if you PM me here I'll honor those same deals as long as they are still active on the website.
I figured there could be enough new faces or unfamiliar faces that I'd just do a little intro again. Conrad Customs, LLC is just a little hobby shop that works in collaboration with mag enthusiasts for mag enthusiasts. Conrad Customs has a special collaboration with KAM Design and XMT, as you might notice since we stock KAM's M86 V2 Frames, and some of the VD re-run components. Our business is completely self-funded and sale-sustained, all proceeds get dumped right back in to making more cool stuff. We hope you like what is yet to come, and we are definitely excited about being able to offer more parts to this community.
Below we will update as much as we can with our current offerings at www.ConradCustoms.net and can be purchased either directly by PM'ing us here or through the website itself.
CC Thrasher Rail
Color Offerings:
Raw Polished $160 + Shipping
Gloss Black $169 + Shipping
Dust Black $169 + Shipping
Specs:
Full length(E-Mag/ULE Body length rail)
Internal ULE Milling
Front foregrip slot, machined to accept 1/4"-20 screws (for the VD V1/V2 Foregrips)
Rear accessory slot, machined to accept 10-32 screws (Matched to original RPG Snatchgrip hardware. Recommend Drilling the slot to 1/4"-20 if VD Snatchgrip use is desired)
Accepts and uses RT Pro/E-mag Sears (Not included.) Uses standard Searpin length.
Weight: < 3.9 oz
CC OverShadow Rail
Color Offerings:
Raw Polished $95 + Shipping
Gloss Black $125 + Shipping
Specs:
Full length(E-Mag/ULE Body length rail)
Internal ULE Milling
Front foregrip slot, machined to accept 1/4"-20 screws (for the VD V1/V2 Foregrips)
Rear accessory slot, machined to accept 1/4"-20 screws (for VD V1 Snatch Grips)
Accepts and uses RT Pro/E-mag Sears. Shortened Searpin included with Rail purchase to accomodate narrower rail.
Weight: < 3 oz.
KAM VD EVO V1
Color Offerings:
Raw Polished $145 + Shipping
Gloss Black $145 + Shipping
Specs:
Flat top milled for RT Pro rails
Machined for Gas Thru Foregrip functionality. 1/8"-NPT threaded on bottom and both sides.
Bolts to rails with two 1/4"-20 screws.
KAM VD EVO V2
Color Offerings:
Raw Polished $145 + Shipping
Gloss Black $145 + Shipping
Specs:
Flat top milled for RT Pro rails
Bolts to rails with two 1/4"-20 screws
KAM VD Snatch Grip
Color Offerings:
Raw Polished $45 + Shipping
Gloss Black $49 + Shipping
Specs:
Snatch Grip for RT Pro rails
Machined from 6061 Aluminum
Bolts to rails with one 1/4"-20 screw.
KAM M86 V2 Frame
Color Offerings:
Gloss Black $250 + Shipping
Specs:
Gloss Black Anodizing (Triggers came out more semi-gloss).
AGD Spec where it counts. Twistlock friendly. AGD Safety compatible (not included)
Pneumag Capable (Mounting for Fabco MSV-2 & Clippard MPA-3, Tapped for Sleeper LPR mount Capability.)
Frame accepts 2X E-mag trigger magnets above the forward trigger stop.
Magnus Sabre Trigger included, Forward & back stop setscrews. (Chaos Trigger can be swapped for additional $25)
Aluminum Grip Panels included.
Magnus Sabre Trigger
Color Offerings:
Gloss Black $35 + Shipping
Specs:
Includes Forward & back stop setscrews
Fits most frames that accept AGD spec'd Triggers (Intelliframe, X Frame, RPG Tritons, RPG ULE Intelliframe, RPG Chimera, Magnus M90, VER frame, various Lc Frames)
CC Chaos Trigger
Color Offerings:
Raw Polished $45 + Shipping
Gloss Black $49 + Shipping
Dust Black $49 + Shipping
Specs:
Slightly wider design, similar to an Emag trigger
Includes Forward & back stop setscrews
Fits most frames that accept AGD spec'd Triggers (Intelliframe, X Frame, RPG Tritons, RPG ULE Intelliframe, RPG Chimera, Magnus M90, VER frame, various Lc Frames)
CC Fluted Gas Thru Foregrip
Color Offerings:
Raw Polished $45 + Shipping (1 of these available)
Gloss Black $49 + Shipping (Restocking)
Add $7 for an Inception Designs Straight Macro Fitting
Specs:
Gas Thru vertical foregrip that screws into RT Pro and AM/MM Vertical ASA's
Machined for Gas Thru Foregrip functionality. Recessed 1/8"-NPT threaded on bottom (Fitting Optional)
CC Twisted Gas Thru Foregrip
Color Offerings:
Raw Polished $54 + Shipping (1 of these available)
Gloss Black $59 + Shipping (Restocking)
Add $7 for an Inception Designs Straight Macro Fitting
Specs:
Spiraled/Twisted for your pleasure
Gas Thru vertical foregrip that screws into RT Pro and AM/MM Vertical ASA's
Machined for Gas Thru Foregrip functionality. Recessed 1/8"-NPT threaded on bottom (Fitting optional)
CC SubZero Feedneck Smooth
Color Offerings:
Gloss Black $60 + Shipping
Specs:
Angel Threaded
Smooth Feedneck Band near bolt locations
Clamps feednecks using 1/4-20 socket head bolt
CC logo'd
CC SubZero Feedneck Notched
Color Offerings:
Gloss Black $60 + Shipping
Specs:
Angel Threaded
Notched Feedneck Band near bolt locations for added flair
Clamps feednecks using 1/4-20 socket head bolt
CC logo'd
Any deals on the website currently (Buy a rail, get a discount on a VD Foregrip, or Buy an M86, get a Shadow rail discount), if you PM me here I'll honor those same deals as long as they are still active on the website.
Comment