Logic Ripper EM - The Electro Solution - PreOrder

[Tool-of-death]

I can do a single Alpha for you, but expect to spend $100+ for it, maybe more.

Also, I'm too damned busy to do it right now anyway.

I have no idea when the preorder frames will all be delivered. Right now, the only thing I can say is check back after the first of the year.

Warbeak - Perhaps. You'll need to hide and watch for a little while.

100$+ isent bad, little more than most but I gotta pay for quality.

I just gotta get AGD to start making SLUG bodyies again

[RTspag]

so yeah, so we were joking about how i got a fat speeding ticket the other week.... so now i've been in jail for the past 20 hours ... i've lost $1900 in 2 months to this damn county.

[Arstron]

so yeah, so we were joking about how i got a fat speeding ticket the other week.... so now i've been in jail for the past 20 hours ... i've lost $1900 in 2 months to this damn county.

Ouch, things going any better now?

[Triangle]

Ryaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaan.
How've you been ?

[CoolHand]

Ryaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaan.
How've you been ?

Busy as hell.

In the last six weeks, I've had one (1) day off.

I was going to go play PB at Xtreme today, but I had to work.

I really am working on these things when I can, but I just don't get much time off anymore.

On the up side, Goldie got back with me last week and told me what was going on with the boards.

They are coming in a couple of weeks, the PCB's had to be refabbed so everything would work as designed.

[going_home]

Oh No Not Again ?

Busy as hell.

In the last six weeks, I've had one (1) day off.

I was going to go play PB at Xtreme today, but I had to work.

I really am working on these things when I can, but I just don't get much time off anymore.

On the up side, Goldie got back with me last week and told me what was going on with the boards.

They are coming in a couple of weeks, the PCB's had to be refabbed so everything would work as designed.

I wish you would get my electro-pnumatic Logic mag done before you come up
with something else I will just have to buy.
Ok just how much is the Two Tube Viking going to cost me ?
LOL

[Triangle]

Where's My Devilmag, Chris?!

[CoolHand]

Where's My Devilmag, Chris?!

Don't be a jackass.

I'm working on the first one's frame to rail adapter, trying to make that interface as smooth as possible. I've got the CAD very close to how I want it, but I still need to make the code and actually cut it. I've got the VA mounted, but I have to custom make one of the fasteners, so that still needs to be done. I'm also still pondering how I want to do the eye covers on that Dallara. Very tricky business there.

AND, I'm still waiting on boards.

We shall see if those show up when they are supposed to.

I'm not running away, and you'll also note that I am not taking any more orders either. I'll get these markers delivered before I take any more work (emergencies and the like not withstanding).

If it looks like AGD is going to tank on me, I will get all the parts bought and warehoused to make sure I can deliver these markers, come hell or high water.

Unless I get killed somehow, I'll get them done.

[Triangle]

Don't be a jackass.

I'm working on the first one's frame to rail adapter, trying to make that interface as smooth as possible. I've got the CAD very close to how I want it, but I still need to make the code and actually cut it. I've got the VA mounted, but I have to custom make one of the fasteners, so that still needs to be done. I'm also still pondering how I want to do the eye covers on that Dallara. Very tricky business there.

AND, I'm still waiting on boards.

We shall see if those show up when they are supposed to.

I'm not running away, and you'll also note that I am not taking any more orders either. I'll get these markers delivered before I take any more work (emergencies and the like not withstanding).

If it looks like AGD is going to tank on me, I will get all the parts bought and warehoused to make sure I can deliver these markers, come hell or high water.

Unless I get killed somehow, I'll get them done.

Heehee.
Oh come on Ryan, you know I'm kidding.
You're never online anymore, so it's difficult to joke with you.


/Why don't you ever look at me when we make love?

[going_home]

Not in front of the kids honey

Heehee.
Oh come on Ryan, you know I'm kidding.
You're never online anymore, so it's difficult to joke with you.


/Why don't you ever look at me when we make love?

Um........ well....... ok

[Chronobreak]

If it looks like AGD is going to tank on me, I will get all the parts bought and warehoused to make sure I can deliver these markers, come hell or high water.

:spit_take

sorry i couldnt help it while following the thread

hope everything goes smooth, i would hate to see things get ugly

[CoolHand]

If it looks like AGD is going to tank on me, I will get all the parts bought and warehoused to make sure I can deliver these markers, come hell or high water.

:spit_take

sorry i couldnt help it while following the thread

hope everything goes smooth, i would hate to see things get ugly

Well, that was supposed to be funny.

I've been holding off buying the bodies and such until that marker's number comes up, so the buyer can change their mind up until that point.

I know several of these have changed hands already, and the new owner doesn't always want what the original order asked for. If I'd already had the parts setting here, I'd be screwed and/or their order would be set in stone.

I don't think AGD is going anywhere.

[grominou69]

i received my alpha rail today .... amazing piece of work ... thanx a lot ryan it will look great on my next project .... it's just sad that you won't make 'em anymore .... those are the lightest on the market using classic sear ...
keep up on the good work

[CoolHand]

Thank you Grom, I am very sorry it took so long to get into your hands.

In other news, I spent about five hours last night with my nose to the CAD stone, but happily, I think I have the eye covers and the rail adapter design finished for marker #1.

I'm going to take a fresh look at it tonight and if I don't see any obvious crap-ups I'm going to start on the CNC code for both.

Hopefully over the weekend I can find enough time to knock them out into real metal. It all depends on how long the coding takes me, and what else comes up in the mean time.

But hey, progress is progress.

[zackzel]

Thank you Grom, I am very sorry it took so long to get into your hands.

In other news, I spent about five hours last night with my nose to the CAD stone, but happily, I think I have the eye covers and the rail adapter design finished for marker #1.

I'm going to take a fresh look at it tonight and if I don't see any obvious crap-ups I'm going to start on the CNC code for both.

Hopefully over the weekend I can find enough time to knock them out into real metal. It all depends on how long the coding takes me, and what else comes up in the mean time.

But hey, progress is progress.

Yes progress is progress, and seriously updates are wonderful, with you I in no way think you are running away with my money. Unfortunatly even if you get number one done quickly, and the next 3 are a breeze I know that mine will probalby take quite a bit of time too due to the Karta body and making eye covers for that. But seriously updates are great I do appreciate them and can't wait to see number one finished up.

Keep up the good work Ryan.