StormWalk pre order

[jay8541]

can you make these to accept the emag internals so it can be used as an emag? i think this frame would be badass with it being an emag.

that is going to be another frame

[jay8541]

after thinking it over for some time....i think i'll go with the clear grips

clear tribal or smooth

[Mongoose]

clear tribal or smooth

hmmm....lets go with the tribal

[thefool]

looking good jay.

[MechMags]

I think the original design is slick as is, three grooves as mentioned might be better than the two... but the original is good.

and in case i forgot.. smooth alum. panels are good for me. Are we still looking at 4-6 weeks?

then a small run on the DBL rail and titanium triggers... yes?

[jay8541]

I think the original design is slick as is, three grooves as mentioned might be better than the two... but the original is good.

and in case i forgot.. smooth alum. panels are good for me. Are we still looking at 4-6 weeks?

then a small run on the DBL rail and titanium triggers... yes?

we are on schedule and after these then the pump kits then the dbl

[Rudz]

to everyone who has ordered one of these frames from jay, i am sorry, it seems jay has a problem with agd specs and his last venture "airwalk" has had many downfalls, including inproper rail businhing holes, trigger slots and proper fit, as well as cosmetic issues. i know these were present on all frames, but enough to raise concern, of the protoype stormwalk i seen and held, it too was not properly milled, the holes we not properly tapped and the holes leaked profusely, to the extent that jb weld couldnmt fix the problem, i just want to make everyone aware of what they are getting themselves into. if you dont belive me, ask the owners of his airwalk frame, and notice how many have hit the BST as of late, alos jay has deleted the airwalk thread due to these and other issues, i hope all of you have a better experience than was already had by jays previous venture. thank you.

[zazzoo]

to everyone who has ordered one of these frames from jay, i am sorry, it seems jay has a problem with agd specs and his last venture "airwalk" has had many downfalls, including inproper rail businhing holes, trigger slots and proper fit, as well as cosmetic issues. i know these were present on all frames, but enough to raise concern, of the protoype stormwalk i seen and held, it too was not properly milled, the holes we not properly tapped and the holes leaked profusely, to the extent that jb weld couldnmt fix the problem, i just want to make everyone aware of what they are getting themselves into. if you dont belive me, ask the owners of his airwalk frame, and notice how many have hit the BST as of late, alos jay has deleted the airwalk thread due to these and other issues, i hope all of you have a better experience than was already had by jays previous venture. thank you.

My airwalk works fine and fits fine i dont understand why you felt it necessary to do this post have you contacted jay about your "messed" up airwalk? im sure he would try to fix it if you asked but this is the 3rd time i have seen you spamming his threads well thats just my 2 cents
And jay keep up the good work

[MedicDVG]

I would only ask that Jay respond to this in terms of buyer satisfaction / warranty issues. I am assuming that this is a bolt on frame that the end user should not have to modify in order to work. I am sinking a significant amount of money into this project mag and I would expect that it perform as advertised.

What say you Jay to these allegations? I am more then willing to spend money on this, but if it doesn't fit, or leaks, or has milling blemishes that can't be polished out, do I get my money back or is it "you bought it, you deal with it?"

Thanks in advance for your response.

Medic

[jay8541]

to everyone who has ordered one of these frames from jay, i am sorry, it seems jay has a problem with agd specs and his last venture "airwalk" has had many downfalls, including inproper rail businhing holes, trigger slots and proper fit, as well as cosmetic issues. i know these were present on all frames, but enough to raise concern, of the protoype stormwalk i seen and held, it too was not properly milled, the holes we not properly tapped and the holes leaked profusely, to the extent that jb weld couldnmt fix the problem, i just want to make everyone aware of what they are getting themselves into. if you dont belive me, ask the owners of his airwalk frame, and notice how many have hit the BST as of late, alos jay has deleted the airwalk thread due to these and other issues, i hope all of you have a better experience than was already had by jays previous venture. thank you.

The deal with the storm walk frame was this Mr know it all. those were thre prototypes. Jai toook his and fit his ep kit to it that is why there were so mkany holes, as for the jb weld he puit that there and could not stop the leak because he grinded down the plug screws just a little to much and put holes in them.

Now as for the one I played with at Tunaball and am sure I smacked you with a few paintballs had no problems at all and I used it all day with out a problem, more then I can say for your SFL.

As for my Airwalk thread , As for the preorder thread the sale was over the thread was closed. Now as for all my other threads whether it was to sell or just to show a marker off, you continued to flame my thread and bash me ike a little girl to the point that the thread just turned into you flapping your gums. I dont hide,I am here everyone knows how to contact me like a man well except you of course.

Rudz you are nothing more then a jock hopper, you pounce from TIP to TIP everytime there is something new or you want something and you post to be carefull in dealing with me, your nothing more then 2 faced, to bad with that second face you did not get another working eye. to help you see the error of your ways

I will ask you one more time nicely to stay out of my threads. Do not get it twisted Ralph I am not TAG and you wont like how this turns out.

[jay8541]

I would only ask that Jay respond to this in terms of buyer satisfaction / warranty issues. I am assuming that this is a bolt on frame that the end user should not have to modify in order to work. I am sinking a significant amount of money into this project mag and I would expect that it perform as advertised.

What say you Jay to these allegations? I am more then willing to spend money on this, but if it doesn't fit, or leaks, or has milling blemishes that can't be polished out, do I get my money back or is it "you bought it, you deal with it?"

Thanks in advance for your response.

Medic

sorry I have been busy working and not on as much, ok if you are not happy because the frame does not work which I have used it myself with plenty of respectiable AO members at Tuna ball I will give you back your money. I never would leave anyone hanging on a product of mine if there was a problem. Now i say this with all honesty I stand behind my stuff and i wouldn't even let leave RUdz hanging if there was an issue a real issue not some of the things he has dreamt up (And I dont like him)

[MedicDVG]

Jay,
Thank you for your response. I was not trying to bust your chops, I was curious to see if you would stand behind your product. I am satisfied that you will.

I am very much looking forward to this project. I have spent quite a bit of time researching anno and I am really looking forward to building this project mag when I get back from Iraq.

Again, thank you for your professionalism on the matter.

Medic

[cyberave68]

to everyone who has ordered one of these frames from jay, i am sorry, it seems jay has a problem with agd specs and his last venture "airwalk" has had many downfalls, including inproper rail businhing holes, trigger slots and proper fit, as well as cosmetic issues. i know these were present on all frames, but enough to raise concern, of the protoype stormwalk i seen and held, it too was not properly milled, the holes we not properly tapped and the holes leaked profusely, to the extent that jb weld couldnmt fix the problem, i just want to make everyone aware of what they are getting themselves into. if you dont belive me, ask the owners of his airwalk frame, and notice how many have hit the BST as of late, alos jay has deleted the airwalk thread due to these and other issues, i hope all of you have a better experience than was already had by jays previous venture. thank you.

As stated in the thread before mailing things out. Jay stated that he missed the bushing issue and if there were any problems to contact him. It was an easy fix and for the first frame i'd say a small mistake at that. Mine is on a karta body and i only had to do a 3 second drill to fit the bushing, No big in my book. Frames look awsome and the panels look even better...

I would only ask that Jay respond to this in terms of buyer satisfaction / warranty issues. I am assuming that this is a bolt on frame that the end user should not have to modify in order to work. I am sinking a significant amount of money into this project mag and I would expect that it perform as advertised.

What say you Jay to these allegations? I am more then willing to spend money on this, but if it doesn't fit, or leaks, or has milling blemishes that can't be polished out, do I get my money back or is it "you bought it, you deal with it?"

Thanks in advance for your response.

Medic

I'm sure the few issues that were with the airwalk were adjusted to fit the storm and any things needed to be addressed, have been...

My .02

[Rudz]

All I ask of jay is he uphold proper fit and function without blemishes or requiring extra work from the end buyer, jay you can run your mouth all you want, your work speaks for it self. And as we have seen, your motivation for perfection isn't high, if everyone is happy with your frames, so be it, I myself won't use any product not up to par with other dealers on this forum, and jay I know for a fact you don't want to threaten me. Thank you.

[wetwrks]

Ok,

I'm new here and I want to get on the list too. What do I need to do?

Thanks.

billybetters2@(removethis)yahoo.com