milling done local by a gunsmith/machinist. support a local VET
this has all the milling/rough sanding done all it needs is a polish/anno any blemishes are just surface scratches
all this needs is a board and noid
included:
06 frame
legend frame (bought recently from woolf)
07 red valve, delrin poppit, springs and LPR
06 LPR
06 and 07 VASA
07 bolt and pin
06 bolt
brass ram
07 ram sleeve and cap
06 manifold
full rebuild from macdev
CP detents
stock eye covers
harness and eyes
Finish this project...
$400 O.B.O.
open to trades...
Automag stuff
CCM
empire reloader B2 internals
surprise me
this has all the milling/rough sanding done all it needs is a polish/anno any blemishes are just surface scratches
all this needs is a board and noid
included:
06 frame
legend frame (bought recently from woolf)
07 red valve, delrin poppit, springs and LPR
06 LPR
06 and 07 VASA
07 bolt and pin
06 bolt
brass ram
07 ram sleeve and cap
06 manifold
full rebuild from macdev
CP detents
stock eye covers
harness and eyes
Finish this project...
$400 O.B.O.
open to trades...
Automag stuff
CCM
empire reloader B2 internals
surprise me