New items added, parting a couple of guns. All of these prices are set at, or below what I paid for these items, so haggling will get you nowhere, as I am losing out on most of the pricing, already. These items are on sale other places, and as such, I will go by the e-mail confirmations that I receive, not by the posts left on various forums. So Pm first, please. Shipping is standard $5 for anything that will fit into a flat-rate box, anything else will need to be priced, buyer pays all shipping fees beyond $5 essentially. I will ship to canada, but again, buy pays all shipping costs beyond $5.
1-$10-Taso Automag to unknown threaded adapter. When I bought it I was told it was autococker threaded, but I suspect it is just a barrel-back for Taso barrel. O-rings and detent included
2-Gone
3-$20-Automag bottom line adapter-great shape, two tiny tool marks on one side. Hardware and original box included.
4-$20-Am/mm rail-good shape, rear holes were factory milled.
5-$10-Back Bottle adapter- polished out previous tool marks. AGD logo is untouched, just need touch-up paint.
6-Gone
7-gone
8-$10-Twistlock assembly
9-$20-am/mm on/off assembly
10-$15-am/mm stock body. Hopper left. Pretty good shape
11-$35-stainless steel powerfeed. Hopper right
12-$45-minimag reverse valve 4 stars-on/off assembly included. Great shape.
13-Parting-SEE BELOW
14-$180-Luke's Customs single-trigger, Vertical grip. Brand-new. never used. The safety and trigger hardware have been installed. The AGD engraved panels are on me.
The Brass Eagle Rainmaker was my unicorn for a great many years. Finally get one, quit playing, that's life for ya. Anyways, this thing is an original, semi-only Rainmaker. Judging by the wear, or lack of, on the exterior of the gun itself, as well as the interior of the gun, and the barrel, I would say this beaut was fired only a handful of times before being stuck in a box. Put air and batteries to it, and it cycled, but has leaks from an old hardened airline. Fairly easy fix, to one so inclined. $175 will get it.
This is a custom pump mag that I built. Center feed Stainless steel body, am/mm valve, milling by Luke's Customs. Dye frame, Dye Stickies, factory center-fed barrel. This thing worked great with the xm15 pump kit previously. The new Rainman kit has a thicker guide rod, and needs to be milled out appropriately, or replace the rod. other than that, its a pretty little gun. $275.
I am parting a couple of projects, now.
Tac-1 Body-$100 great shape, singe detent, no issues
Xvalve- Newly rebuilt, as per BeefyDan protocol, lvl 7-$160
MicroMag Rt valve-Literally brand-new, never used-$150
Ultra rare Minimag LE Body-Bought this brand-new from PTP. Sear included, as well as matching foregrip-$200
Tac-1 ULT rail-Has been milled by Luke to be used with twist-lock barrels, as well. Sear included-$90
2 Benchmark frames, both flat-topped for Rt rails. Brand new, never used. $45 for each.
thanks guys, more items to be added later.
BeefyDan
1-$10-Taso Automag to unknown threaded adapter. When I bought it I was told it was autococker threaded, but I suspect it is just a barrel-back for Taso barrel. O-rings and detent included
2-Gone
3-$20-Automag bottom line adapter-great shape, two tiny tool marks on one side. Hardware and original box included.
4-$20-Am/mm rail-good shape, rear holes were factory milled.
5-$10-Back Bottle adapter- polished out previous tool marks. AGD logo is untouched, just need touch-up paint.
6-Gone
7-gone
8-$10-Twistlock assembly
9-$20-am/mm on/off assembly
10-$15-am/mm stock body. Hopper left. Pretty good shape
11-$35-stainless steel powerfeed. Hopper right
12-$45-minimag reverse valve 4 stars-on/off assembly included. Great shape.
13-Parting-SEE BELOW
14-$180-Luke's Customs single-trigger, Vertical grip. Brand-new. never used. The safety and trigger hardware have been installed. The AGD engraved panels are on me.
The Brass Eagle Rainmaker was my unicorn for a great many years. Finally get one, quit playing, that's life for ya. Anyways, this thing is an original, semi-only Rainmaker. Judging by the wear, or lack of, on the exterior of the gun itself, as well as the interior of the gun, and the barrel, I would say this beaut was fired only a handful of times before being stuck in a box. Put air and batteries to it, and it cycled, but has leaks from an old hardened airline. Fairly easy fix, to one so inclined. $175 will get it.
This is a custom pump mag that I built. Center feed Stainless steel body, am/mm valve, milling by Luke's Customs. Dye frame, Dye Stickies, factory center-fed barrel. This thing worked great with the xm15 pump kit previously. The new Rainman kit has a thicker guide rod, and needs to be milled out appropriately, or replace the rod. other than that, its a pretty little gun. $275.
I am parting a couple of projects, now.
Tac-1 Body-$100 great shape, singe detent, no issues
Xvalve- Newly rebuilt, as per BeefyDan protocol, lvl 7-$160
MicroMag Rt valve-Literally brand-new, never used-$150
Ultra rare Minimag LE Body-Bought this brand-new from PTP. Sear included, as well as matching foregrip-$200
Tac-1 ULT rail-Has been milled by Luke to be used with twist-lock barrels, as well. Sear included-$90
2 Benchmark frames, both flat-topped for Rt rails. Brand new, never used. $45 for each.
thanks guys, more items to be added later.
BeefyDan
Attached Files
Comment