[Sold] *SOLD* Custom EgoMag by renie - without valve

[flampaint]

selling this one-of-a-kind custom EgoMag (used to belong to eelz, then Maverick13 and now it is in my possession):

works fine - selling it without an X-Valve (recommended Valve to use with it in conjunction with a ULT on/off which is included in this package)

Features:
* custom made rail and sear by renie (Valve screw included and pictured)
* black ULE body with clamping CCM feedneck
* ult on/off you can drop into your X-Valve
* etek 1 frame and new Virtue board (uses trilogy sf festo noid/ram) I will include an extra brand new replacement solenoid (not pictured). To be clear: the installed one is working just fine
* CP reg which provides around 80-90 psi via the ego frm to the noid/ram
* CP ASA with CCM fittings


looking for 440.- USD shipped from Europe to wherever you live.
Buyer covers PayPal fees.
Please post here first, then send message.

Thanks for looking
1-20150909_131053.jpg4-20150909_131435.jpg2-20150909_131103.jpg3-20150909_131259.jpg

[Stevescuba]

Pming

[fz6soldier]

Would you part the extra solenoid? Is this a push solenoid with built in rammer? I need a thin solenoid for my current project, and that one seems like it might be perfect.

[flampaint]

Would you part the extra solenoid? Is this a push solenoid with built in rammer? I need a thin solenoid for my current project, and that one seems like it might be perfect.

could work. It's one like this one.
IF I were to part, the only question remaining is if it's worth the cost of shipping (I assume you are not in Europe but somewhere in the US?).

[Stedspitcher]

Pm...any trade options.

[fz6soldier]

oh, forgot you did say you're in Europe, nevermind then. But that looks like a barb for an air hose. I am just confused how it trips the sear. Does it have a rammer on the back end? My current project will be strickly electric, no LPR or msv.

[flampaint]

oh, forgot you did say you're in Europe, nevermind then. But that looks like a barb for an air hose. I am just confused how it trips the sear. Does it have a rammer on the back end? My current project will be strickly electric, no LPR or msv.

Yup, an lpr hose runs internally through the frame to that barb on the noid. Its ram on the other side then trips the custom sear. No pure electro here. It's a so-called E-pneu - works like a charm with that new Virtue board

[fz6soldier]

Ok, thanks for the explanation.

[flampaint]

adding this Lapco barrel to the package at no extra cost (I acquired the marker with that barrel and I think it matches up well with the whole package)
1-20150910_082616.jpg

[renie]

that was one of my 1st egomags with the ego FRM cut into the rail, which give a real clean look, people soon followed suit
the trilogy noid works a charm I used a classic valve it it and hit 15bps no problem with the ULT
here's some pics of the build:

[flampaint]

that was one of my 1st egomags with the ego FRM cut into the rail, which give a real clean look, people soon followed suit
the trilogy noid works a charm I used a classic valve it it and hit 15bps no problem with the ULT

Nice. Thanks for the pictures and the info Renie!
The whole setup still works a charm. You should seriously consider building a couple of these!

[knownothingmags]

Nice. Thanks for the pictures and the info Renie!
The whole setup still works a charm. You should seriously consider building a couple of these!

no no no, he needs to get that body he designed out to the public

[renie]

no no no, he needs to get that body he designed out to the public

I know, I know I have a slug ready for milling but have had no time to do anything with it had a rough year but hopefully get some time to get back into the swing of it

[Laku]

I know, I know I have a slug ready for milling but have had no time to do anything with it had a rough year but hopefully get some time to get back into the swing of it

I can wait.

[knownothingmags]

so is this an auction type of sale too?