Longbow, TacOne and other 'Mag build components

[Major Ho]

Hi all,

Dug these out of storage, looking to offload to fund some other hobbies:

SpecOps Longbow stock, rail and TacOne body (Ideally packaged together, PM me if otherwise. Asking $450)
SOLD Diamond Labs Single trigger frame, $80 SOLD
Minimag valve, $75
Warp Feed (functional, but no accessories e.g. hose, powerfeed plug, mounting plate) $100
Powerfeed left body, $60
Classic Rail, $35
Flatline Oring kit (orings don't look dry rotted), $5


I only did a few minutes of searching to eyeball prices, so OBRO.

https://lh3.googleusercontent.com/pw/AM-JKLWgEJEgHQiYfNcwaJV0z1x6uYZKFGbncf5zd3AD5GCxIV2PSYrMZEeCGgBD3yDK1nNaRUZPAfxFjPpeJrnIRehVg_x5VjuRE5RbUs4G6ViGZuzp3J8-c7FOkg0SsJ_m7P0CtNDN3HOabUnlZSzxvIJxmw=w649-h865-no?authuser=0

https://lh3.googleusercontent.com/pw/AM-JKLWEO_p2As411aAo3_VqWH_4ohTcNUhs3A_qnQ8-8dArJCGDnGPbbGU5suPsnCz5SAll2AgGb5e2YooeUYiMqk1Ue4VyCndI8rhfZqEHreN9TcmjLgVN02EDQhh8TZeJQddkuFb_XYGzhQlnO4CjHW6-uA=w1154-h865-no?authuser=0

https://lh3.googleusercontent.com/pw/AM-JKLXccmOmTkfEfBKehL3bdXlJ0hav0dxD8k17eFCwKmVtJ7m5vBDr60MiCqD9-EPAVnawyLJW1cQaJEmwP_IZ5Olq950UsGOP5H30Gw8IWKd8CmvYYQmxLug1UUVo4So_At8tCrBK-RdWv7Jg5b9VDbR0TQ=w1154-h865-no?authuser=0

https://lh3.googleusercontent.com/pw/AM-JKLWgbU7MeqbnMBAQ_OBwyLpCAp2V7lhUB6QSxWlW2AHoLyWdQAvUGMLNZgaa3x95mdOQ1AnbH7zcNa2aS0cxXq01i8g2PTYbVgKZ0ol0oLuRf0o50gbIOKqT2eSg623J0YcpnXKLo0KQv7D8j3-u382kZA=w1154-h865-no?authuser=0

https://lh3.googleusercontent.com/pw/AM-JKLWSgI1r967GvkH_VoAEVELujygFxU2VT7TJNTXDl6F8fdCRs4Ib_d05OsduCJ8p95SDkGj5TA8Zi_bKCddva0n90UIVhpEsdcCD1s33eAvGrMLOs5i9jwiIt2MDL3yYe6hPIb7ZDD69WwJI8rPJVhLuow=w649-h865-no?authuser=0

https://lh3.googleusercontent.com/pw/AM-JKLWa45MTVDe821IwQJCZY8E__WhFUyJ5ebppzpGTWlEMt4hQ-1S2E5VA26_O1u66seWPcgxRscXtbQHPaZ75-FYSCm8F4vYkP5PlOTIgOEvnjngiszCsn4WgyVC0RqZutzRJpbnYD7ZEniI2kDvYDLE-aQ=w649-h865-no?authuser=0

https://lh3.googleusercontent.com/pw/AM-JKLXf9e9yS1b01Z96ziFyNFmAcskAdhQ6QsPIvFGhlHXwzFQdlsvNjTmZ71ZUbUTAeq4qj-tS5g8rR5BpI9UdaIbxjcvVxuaplFIUVqmOCscVuisgO7NwoPxuOys_MrQIXR1PyQjEB7v275RLpKvrxziThQ=w1154-h865-no?authuser=0

\\I'm in IT and getting my a$$ kicked trying to figure out how to upload/embed images.
\\\Hyperlinked for now

[scottieb]

I'll take the Diamond Labs frame. PM'd.

[C_losjoker]

if scott passes on the frame i would take it.

[AmyM]

Do you still have the valve?

[Major Ho]

Do you still have the valve?

Hello AmyM, I had to check but I do!
Just a standalone valve, I dont think I have a frame to air it up and check though?

I just sold that Diamond Labs frame and can't recall if I tried this particular valve combination with the other parts.

I have everything from the rail up to verify function before sending it out. LMK if youre still interested

[Crappiehunter]

Pm sent.
Warp feed?