That's a repost. Was editing the post on my phone, it lagged, and somehow the post got deleted. I'm glad I had a copy of the post in a text editor...
Stuff has to go. Didn't use it for years.
Shipping is not included. I'm in Canada, will ship anywhere. For shipping, I have a job account with decent pricing. We can work through it and see what's the best deal.
If you give me your full address on your first PM, I can respond to you with a shipping quote directly.
Payment method is Paypal, friends/family or fees to be added.
Link to my AO FeedBack
1. EP Mag Project Parts - 65$ - Sold
Parts from a project I built a wile ago. The gun was shooting great! See post below and video. But I had a design flaw the way I installed the membrane pad and the wire of the pad broke behind the handle. I intended the rebuild this project, but never got around it.
Videos are for reference only to show how the gun operated.
- Universal T-Board (UTB) https://www.pbnation.com/images/manuals/792.pdf
- MPA-3 s
- Two Solenoid valves
- LPR
- Switches
- Membranes
- Fittings
- Everything you see in the picture
2. ULE Warp Left Body - 85$ - Sold
- Small scratches on the right hand side where the air connected to the valve
3. Smart Parts grip -40$ - Sold
4. Warp left AM/MM Rail - 85$
5. Warp Left Milled E-Mag Rail - 100$ - Sold
- Comes with the pin to hold the sear
N.B. I also have a Warp Feed with many spare parts. I just need to do a minor repair since I broke the battery connector last time I played. PM me if you're interested.
6. E-Mag Hollow Box - 100$
- A guy on the forum built this years ago. I had it polished and anodized. Compartiment can be accessed from underneath.
7. ASA - 5$ - Sold
8. Automag Front Grip - 30$ - Sold
9. Drop 5" x 1.75" - 10$
10. Spyder TL - 50$
- My first gun!
- 14" Smart Parts Barrel
- 45 deg Elbow included
- Spare venturi bold included
- Was working fine. Just had a small internal leak and switched to Automags before I got to repair it
11. NXe 4+1 Harness - 40$
- 4 pods included
- Pretty much new, I quickly switched to a 4 Butt Pack
12. 14" Barrel - 20$ - Sold
- Autocoker Threads
- Long Shot BL/SS
- 0.691 Bore
13. 6 Barrel Bag - 20$ - Sold
- Barrels in the bag on the pictures are not included. There are simply to show what a 14" barrel look like in the bag.
14. Short Front Barrel - 10$ - Sold
- Threads unknown
- Maybe they go with Freak Kits I am not sure
15. Warp Feed - 95$ - Sold
Comes with the bracket and the adaptor in the pictures. It has the 12V mode, and I installed a second regulator that gives another 9V plug. I used it to power my 9V EP Mag. It was using batteries from the Warp Feed instead of adding a third battery, it worked like a charm.
Some of the connections have been resoldered over time. The enclosure has some scratches, nothig major at all.
I tested the button and the Warp turns really well. I was not able to test the vibration sensor (price reflects that). In any case, they still sell them on AGD for 6$.
http://www.airgundesigns.com/product-p/001421.htm
16. Warp Feed Spare Parts - 30$ - Sold
Contains 8 discs and 15 belts. 100% brand new.
17. Warp Feed Elbow - 10$ - Sold
Bought this on the forum years ago. An 90 deg elbow that has been powder coated. Makes for a really sleek setup. The price is for the elbow alone. Other pictures are to show how it fits on the body.
Stuff has to go. Didn't use it for years.
Shipping is not included. I'm in Canada, will ship anywhere. For shipping, I have a job account with decent pricing. We can work through it and see what's the best deal.
If you give me your full address on your first PM, I can respond to you with a shipping quote directly.
Payment method is Paypal, friends/family or fees to be added.
Link to my AO FeedBack
1. EP Mag Project Parts - 65$ - Sold
Parts from a project I built a wile ago. The gun was shooting great! See post below and video. But I had a design flaw the way I installed the membrane pad and the wire of the pad broke behind the handle. I intended the rebuild this project, but never got around it.
Videos are for reference only to show how the gun operated.
- Universal T-Board (UTB) https://www.pbnation.com/images/manuals/792.pdf
- MPA-3 s
- Two Solenoid valves
- LPR
- Switches
- Membranes
- Fittings
- Everything you see in the picture
2. ULE Warp Left Body - 85$ - Sold
- Small scratches on the right hand side where the air connected to the valve
3. Smart Parts grip -40$ - Sold
4. Warp left AM/MM Rail - 85$
5. Warp Left Milled E-Mag Rail - 100$ - Sold
- Comes with the pin to hold the sear
N.B. I also have a Warp Feed with many spare parts. I just need to do a minor repair since I broke the battery connector last time I played. PM me if you're interested.
6. E-Mag Hollow Box - 100$
- A guy on the forum built this years ago. I had it polished and anodized. Compartiment can be accessed from underneath.
7. ASA - 5$ - Sold
8. Automag Front Grip - 30$ - Sold
9. Drop 5" x 1.75" - 10$
10. Spyder TL - 50$
- My first gun!
- 14" Smart Parts Barrel
- 45 deg Elbow included
- Spare venturi bold included
- Was working fine. Just had a small internal leak and switched to Automags before I got to repair it
11. NXe 4+1 Harness - 40$
- 4 pods included
- Pretty much new, I quickly switched to a 4 Butt Pack
12. 14" Barrel - 20$ - Sold
- Autocoker Threads
- Long Shot BL/SS
- 0.691 Bore
13. 6 Barrel Bag - 20$ - Sold
- Barrels in the bag on the pictures are not included. There are simply to show what a 14" barrel look like in the bag.
14. Short Front Barrel - 10$ - Sold
- Threads unknown
- Maybe they go with Freak Kits I am not sure
15. Warp Feed - 95$ - Sold
Comes with the bracket and the adaptor in the pictures. It has the 12V mode, and I installed a second regulator that gives another 9V plug. I used it to power my 9V EP Mag. It was using batteries from the Warp Feed instead of adding a third battery, it worked like a charm.
Some of the connections have been resoldered over time. The enclosure has some scratches, nothig major at all.
I tested the button and the Warp turns really well. I was not able to test the vibration sensor (price reflects that). In any case, they still sell them on AGD for 6$.
http://www.airgundesigns.com/product-p/001421.htm
16. Warp Feed Spare Parts - 30$ - Sold
Contains 8 discs and 15 belts. 100% brand new.
17. Warp Feed Elbow - 10$ - Sold
Bought this on the forum years ago. An 90 deg elbow that has been powder coated. Makes for a really sleek setup. The price is for the elbow alone. Other pictures are to show how it fits on the body.
Comment