Splash mag with upgrades

[trbo323]

Scooped this thing up but not sure what it's really worth as I'm not sure what a full set of splash parts goes for.

Chrome minimag body
Lab hurricane regulator (I know nothing about these)
Ans phase 2 bolt
Pump milled rail (someone confirm this, I haven't dealt with too many)
Cut frame (sad I know) but what frame is this? Aluminum obviously
RT pro sear (correct?) Needs a trigger bar obviously

After digging around a bit, I believe it's a smart parts grey splash, circa 99-01 anno

I think that's all

Sent from my motorola edge 5G UW (2021) using Tapatalk

[vintage]

finding a trigger frame that is not cut on these is the biggest challenge and expense.

[vintage]

if you keep it ditch the bolt for an AGD one.

[vintage]

i believe that is Diamond Labs hurricane valve back.

[vintage]

only thing your missing is the matching barrel and asa. i would say $300.00 ish

[trbo323]

Anyone know what safety this frame takes?

Hurricane valve take standard mm rebuild kit?

[alpha_q_up23]

The safety should be the stock agd, and yes the hurricane valve should take a standard mm rebuild.

[trbo323]

The safety should be the stock agd, and yes the hurricane valve should take a standard mm rebuild.

Yes but there's 2, one for the cf frames and one for intelli frames

Sent from my motorola edge 5G UW (2021) using Tapatalk

[alpha_q_up23]

Hrmmmm never realized there was a difference in the two, learn something new every day

[trbo323]

Hrmmmm never realized there was a difference in the two, learn something new every day

I mean maybe there is? On the agd web page they are listed separate

But this was a single trigger frame line the cf frames, but it's aluminum line the intellis so I'm not sure which one will work

Sent from my motorola edge 5G UW (2021) using Tapatalk

[Walker]

Use the one for the CF frame.....

[Skeese]

I've got a splash minimag as well in the British racing green and was wondering the same thing about the safety as it is missing. Unfortunately somebody cut the trigger frame on it too but at least they did a pretty clean job of it for whatever that is worth.

[Skeese]

Use the one for the CF frame.....

https://www.airgundesigns.com/product-p/000328.htm

This one?

Skeese

[vintage]

https://www.airgundesigns.com/product-p/000328.htm

This one?

Skeese

yes, or just keep your finger off the trigger.

[trbo323]

yes, or just keep your finger off the trigger.

Some of us like having our markers complete though

Sent from my motorola edge 5G UW (2021) using Tapatalk