hi, all. wtb angled vert ASA for an amm/mm rail. thanks.
-
-
opbn might have one... -
-
no thanks. too pricey.Comment
-
-
bro, pick yourself up an ANGEL 15* vasa from IIsports off ebay for 5$. as long as you are running just a foregrip (non gas-through, running air line from your valve to bottomline) you can mod your rail by drilling a small hole in it (not all the way through) where the new vasa pin can go into, so it doesnt move around on you. then, simply get yourself some hardware (bolt, lock washer & nut) and you're set. you use the existing hole from your old vasa to put your hardware through and tighten down your new 15* vasa. no need to pay no 60$ for one. Get creative. I also modded a $5 angel snatch grip to work on my rail as well. easy doing, easy money. both work and look flawless.
hard to see in my pics but, reading the mod above and looking at your rail and mounting option, you will understand what iam talking about.
kapp vasa
_12_zps9aed2780.jpg
my mag
photo2_zps3799ae07.jpg
photo1_zps53c924ea.jpg
photo3_zpsb6e2b073.jpgComment
Comment