E/X-Mag Microcontroller Programming (Atmel AT90S2313)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • BigEvil
    www.BigEvilOnline.com

    • Feb 2005
    • 9333

    #616
    Originally posted by muskratjim
    update played with gun all day at work, three tanks of air. big evil you were right guys check your trigger rod length it does afect performance(to long and it like short stroking a old mag) two higher the imput pressure the better(now i need an adjustable reg any sugestions)
    setting

    mode both full and psp
    rof 15 to 17
    dwell 15
    fix 5
    input pressure 800 from a crossfire hp
    no problems at 15---- some drop was noticed at 17 thinking that higher input pressure should cure
    loader was a velocity on force setting 3

    no breaks thru 500 rounds---- and boy did that go fast
    by the way lorne you-da-f-man later jim


    rocking a mag since '91
    Try raising your dwell by incriments of one and see if it sounds better over 15bps. Your Noid plunger may also be out of spec a bit. Increasing the length by 1/4 turn could help. Make sure you loctite it when you are done or it will loosen and spin.

    Comment

    • Chrishew09
      Psalm 119:9
      • Oct 2005
      • 657

      #617
      So I played a hand full of games today with my Xmod Emag, and I know I have said it before but I just wanted to say it again HOLLY CRAP!!!
      Just for the fun of it I tryed HyperMode at the range and WOW so cool.

      Comment

      • Jotsy
        ya dirty dirty shisno
        • Nov 2004
        • 262

        #618
        so i was reading one of the threads in the main section and rrfireblade mentioned that he has a chrono mode in his software (i assume fireblade).

        would this be something worth adding into the code or is the fps spike just not that much?

        btw, just wanted to let ya know, comin on 3 months playing with xmod in my gun now, and haven't run into a single problem yet

        Comment

        • ABTOCMEPTb

          #619
          Does anybody need programmer for $75 shipped? I got nothing to program anymore.

          Comment

          • BigEvil
            www.BigEvilOnline.com

            • Feb 2005
            • 9333

            #620
            Originally posted by Jotsy
            so i was reading one of the threads in the main section and rrfireblade mentioned that he has a chrono mode in his software (i assume fireblade).

            would this be something worth adding into the code or is the fps spike just not that much?

            From what IM told it isnt very good for the solenoid. That big monster can overheat doing something like that.

            Comment

            • craltal
              MCB, baby...
              • Oct 2003
              • 1452

              #621
              Originally posted by ABTOCMEPTb
              Does anybody need programmer for $75 shipped? I got nothing to program anymore.
              so this guy is over at pbn offering to flash people's guns for them for $20. isn't hat a violation of the downlaod agreement?

              Comment

              • StygShore
                Waterford, MI

                • Aug 2002
                • 2854

                #622
                bound to happen

                Bound to happen sooner or later.... just like I am sure there are people who bought the programmer and then programmed all their friends E/X mags for them.

                Lorne should be proud, he has had his software "bootlegged" in a certain aspect :)

                But seriously, it is not cool of that guy to pull that crap. Any way to put programming into the programmer where you have to get a password from Lorne every time you flash a board so they cant just program everyone elses guns and make a profit off of it?

                Anything in the "contract" to download or purchase the programmer that legally prevents people from doing such a thing?


                Sucks you have to FORCE people to be honest now a days doesnt it?


                Styg
                Sometimes It's Good to be EVIL

                Comment

                • LENIN

                  #623
                  I offered to Lorne to buy it back from me for $50. He refused. Again why do I need this programmer if I dont have anything to programm? I am either selling it or will flash other people. I know tons of people here on AO did it already. G-D only knows for free or for money.

                  Comment

                  • warpspyder
                    I CAN fix stupid
                    • Jul 2004
                    • 428

                    #624
                    That's possibly the most ridiculous thing I've ever heard.

                    Are you kidding me? You read the agreement before you purchased the programmer right? You know what you were allowed to do, and you still bought it....

                    How do you function in society with ideals like yours? It's ok to breech an agreement as long as the other party doesn't go out of their way to appease you. Congratulations. You win a prize. The I suck at life prize.

                    *That was really harsh, but I don't like watching people put in so much hard work and time on something only to have a certain few over privileged whiners do what they please with it*


                    Leading the Spyder revolution!

                    Comment

                    • LENIN

                      #625
                      Than mark this day young bozo. I dont see why cant I flash my friends markers.....Or why cant I resale it.

                      Comment

                      • warpspyder
                        I CAN fix stupid
                        • Jul 2004
                        • 428

                        #626
                        Originally posted by LENIN
                        Than mark this day young bozo. I dont see why cant I flash my friends markers.....Or why cant I resale it.
                        Page three of the manual which contains the text of the license you agreed to by installing the software on your marker... and I quote

                        "This agreement allows you to: Install and use the software on your personal gun/guns"

                        Something about the word personal and the absence of key phrases like "please take money for my work" makes me think that maybe what you're doing is highly unethical.

                        Hey maybe I just have morals. Not my problem if your family didn't teach you those.


                        Leading the Spyder revolution!

                        Comment

                        • LENIN

                          #627
                          or maybe you just want to look highly moral? When in real life you are worst piece of ****. And maybe its me who is good in real life and piece of **** online?

                          Or should we just trust you just cause your post the right words? I guess its my word against yours.

                          Or, maybe I am just trolling for moral dudes like you to bite on my "immoral" offer

                          Comment

                          • warpspyder
                            I CAN fix stupid
                            • Jul 2004
                            • 428

                            #628
                            Haha. Well unfortunately I like my words better. You can do whatever you want. See unlike the software you did pay for your internet (or your daddy did, I'm not really sure about your age). So you have every right to be here and say whatever you want. Doesn't excuse you breaching an agreement, but again if you're under 18 like you appear to be that really doesn't matter.

                            So again, I wish that you have a nice life, hopefully I will never meet you.

                            Good day.


                            Leading the Spyder revolution!

                            Comment

                            • LENIN

                              #629
                              yep, get lost fool.

                              Comment

                              • dIVEANX
                                Jim@APE
                                • Jun 2004
                                • 206

                                #630
                                Im sure Lorne is watching this and can remove them from his database in his website so they will not be able to download any further updates or the final version when it is released.

                                Also anyone thinking of getting our ACE board when it comes out will have to use the XMOD software because we are not putting a switch on the side to turn the eyes off. Just a little thing we are doing to keep the cost down on the production of the board so we can sell them to you guys at a reasonable price.

                                I have always believed "What goes around comes around" I have seen it in life many times.

                                I am sure that several people have flashed thier friends markers and when you make something like this it is bound to happen. Just like Im sure that at least 50% of the people that come on this forum that do anything with computers has some kind of bootleg or hacked software on their computer.

                                Life is life and its going to happen, all you can do is make the best of it and go on and hope that most of the people stick to the agreement that they read.

                                Now this is a stupid statement
                                I offered to Lorne to buy it back from me for $50. He refused.
                                Why would he buy it back for probably alot more then he paid for it? Selling after you buy it is pretty stupid as well. As everyone knows 1.7 IS NOT the final release and you will need the programmer further update your version so I guess someone is not thinking very well or they are just trying to start problems and turn the AGD forums into PBN which I hope the mods here will not let that happen.

                                Comment

                                Working...