E/X-Mag Microcontroller Programming (Atmel AT90S2313)

[sean33]

how much faster will this make my x-mag if i have this with the tuna blade??

[11 Bravo]

^^^^^^^^^^^So far I have had mine up to 20 bps. You can probably get up to 23 or 25. I figured 20 was fast enough and I am not going to play a game at 20 bps anyway.

Note: that was with ramping.
On semi in the practice setting I can reach 16 bps on the rof display.

[BigEvil]

^^^^^^^^^^^So far I have had mine up to 20 bps. You can probably get up to 23 or 25. I figured 20 was fast enough and I am not going to play a game at 20 bps anyway.

FYI - with ramping too, and modes, wonderful, wonderful modes.


I should make stickers for the sides of the guns "NOW WITH RAMPING!!"

[sean33]

DUUUUDEEE do that good idea
ull make a fortune for the "XMODERS" dude ill buy one...so whats the highest you can set it to?

[11 Bravo]

DUUUUDEEE do that good idea
ull make a fortune for the "XMODERS" dude ill buy one...so whats the highest you can set it to?

31 bps, but your gun will explode if you set it to that #.
From what I hear 26 bps is the max for an E/X Mag.

[LorneCash]

the max ROF is 31, the gun can shoot that fast if the dwell is set correctly and the input pressure is just below 3000psi. One of my first BETA testers verified this with a Q-Loader by hooking his gun directly to a scuba tank at 2800psi. However, If your dwell is set to high or you hold that rate of fire for an extended period of time it is possible to fry your solenoid. Also if the input pressure is not high enough you will destroy your sear. So be warned, I let the ROF stay that high mainly for PR-T mode so that the ROF would not limit you when you are trying to see how fast you can pull with the solenoid OFF. With a normal HPA tank that has a fixed output pressure of 800-1000psi you should not set the ROF above 20bps.

[sean33]

fast enough for me...put me on the list for the program when it comes out.. i got a 100 dollars saved up for this and i cant wait

[bunny5]

LorneCash: Hows it going? I've been on the preorder list at TAGsportz.com for alongtime now. Just wondering, If I buy the programmer could I load the software on a couple of my emags?

[sean33]

ummm are you trying to say that is it possible to out the program on your e-mag..well if so i think you can..

[Tim Taylor]

Lorne,

Have you received the German programmer as yet?

I may have a line on the AVRISP (not MK2). If I can get them I'll let you know how many.

Thanks for your efforts!

[SeeK]

31 bps, but your gun will explode if you set it to that #.
From what I hear 26 bps is the max for an E/X Mag.

If you fire it at 31 bps then you'd explode from the woody that won't quit.

[sean33]

hahahahah...damn no ****.....

[LorneCash]

No word on the ICprog yet. It was shipped on 2-19-06 so it should be comming any day now. Be sure, the instant I get my hands on it I will attempt to upload my software with it and report with a post here as to how it worked.

If there are AVRISP's out there they work great. That's what I use. I'm sure there would be someone who could use them.

[GoblinGreen]

Hey Lornecash

Not getting a reply on my email, any luck sending the programmer to South Africa. I am all payed up for the ATSTK500. Just need some kinda clue if its on the way over here yet.


dont forget about africa we are starving for this software and thats not a ninja its a black man in a balaklava!

[11 Bravo]

I just noticed that the Xmod software is listed over on www.Xmagworld.com