What's this??

[boddah]

Sent from my iPhone using Tapatalk

[rawbutter]

junk

[boddah]

Haha ya I figured that. You got any other info


Sent from my iPhone using Tapatalk

[rawbutter]

I was kinda kidding before. Kinda.

It's definitely some kind of Spyder clone with an e-grip. Maybe an Icon? Or it's an actual Spyder. Gosh, there's so many variants of that thing, it's hard to ID any specific model. They all look 99% the same except for a different expansion chamber or feedneck or whatever.

If you're thinking of buying it, I wouldn't pay more than $50. And that's if it actually shoots. If it's older and not cared for, you could need new o-rings, new springs, new cup seal, new battery (it probably needs one of those special 9.6v batteries)....that adds up quick. For the price, I'd much rather have an old ICD Promaster or BKO. They sell for $50-$100 all day.

[boddah]

I bought this just for the drop forward hahaha. Got the gun a set of jt' s and a hopper for $20! Don't have air to test it but the electrics seems fine. Does it take cocker barrels


Sent from my iPhone using Tapatalk

[rawbutter]

I bought this just for the drop forward hahaha. Got the gun a set of jt' s and a hopper for $20! Don't have air to test it but the electrics seems fine. Does it take cocker barrels


Sent from my iPhone using Tapatalk

Okay, that's not a terrible deal, then. I doubt it takes cocker barrels, though. Spyder barrels are your best bet.

[Kartan]

for some reason I doubt that the drop forward has a standard whole pattern...

[boddah]

for some reason I doubt that the drop forward has a standard whole pattern...

Oh don't say that!


Sent from my iPhone using Tapatalk

[rawbutter]

Yeah, the ASA holes probably look like this:

http://www.ebay.com/itm/pair-2-VL-Pa...gAAOSw44BYPezX

You might have to get one of these to make the drop work with a regular marker.

http://www.ebay.com/itm/NEW-CP-Spyde...YAAOSw-zxWo3uS

[blackdeath1k]

Yeah, the ASA holes probably look like this:

http://www.ebay.com/itm/pair-2-VL-Pa...gAAOSw44BYPezX

You might have to get one of these to make the drop work with a regular marker.

http://www.ebay.com/itm/NEW-CP-Spyde...YAAOSw-zxWo3uS

That would be my guess as well. I'd just re drill and tap it though.

Gotta love the off standard Spyder design.

[tucson.az.jbreen]

That looks strikingly similar to an electronic game face I had in an orange to black fade. The gun didn't work out of the box and I was too young to fix it.

[Flatliner333]

Use the electronics to make you a SpyderMag.

[CalledFollower]

Pretty sure it's not a Spyder. Kingman didn't serialize their markers, and that one has a serial number.

[Nobody]

Its a dragun from some shop that was fly by night doing spyder clones (which is ironic, as the spyder was a clone of the original design, PMI3)

The drop to frame might be tandem like regualr bottom line setups, BUT i will put money on that the ASA to drop screws will be tandem; i.e. side by side...

Like the "D'oh!" And head slapping begin.

[boddah]

Its a dragun from some shop that was fly by night doing spyder clones (which is ironic, as the spyder was a clone of the original design, PMI3)

The drop to frame might be tandem like regualr bottom line setups, BUT i will put money on that the ASA to drop screws will be tandem; i.e. side by side...

Like the "D'oh!" And head slapping begin.

Yes the drop did line up but had to be drilled for bigger screws. I thought I could use the Asa and maybe the grip but the braided hose is not long enough and has totally different threads! This gun is retarded, some of the Allen screws are metric and some imperial! So I had to use an old Asa that didn't sit level and had to put a nut to shim it hahaha it looks pretty sketchy but it's almost ready to go... just need a longer air line.


Sent from my iPhone using Tapatalk