joey, the idea of a router is that you only need the one
IP address that your ISP assigns you.
the router then handles all the information going to
and from the ISP from each computer connected to it.
the router that i have, linksys befsr11 allows up to
253 coumpters to share that one IP address
xspyx do you have the paperwork that came with your cable
hookup ? if so it should have an explaination of how to
configure your computer.
otherwise go to the computer with the internet connection
doubleclick my computer
doubleclick control panel
doubleclick network
click on the configuration tab
click on tcp/ip (in the white installed components box)
click on the properties button
you now have 7 tabs. write down what is in the
ip adress,wins config,gateway and dns config tabs
copy this information exactly into your computer.
next back to control panel
doubleclick internet options
click the connections tab
check the "never dial a connection"
click on lan settings (same tab)
finally check "automatically detect settings"
click ok
your done (we hope)
finally did i mention that a router is a great way to do
this
IP address that your ISP assigns you.
the router then handles all the information going to
and from the ISP from each computer connected to it.
the router that i have, linksys befsr11 allows up to
253 coumpters to share that one IP address
xspyx do you have the paperwork that came with your cable
hookup ? if so it should have an explaination of how to
configure your computer.
otherwise go to the computer with the internet connection
doubleclick my computer
doubleclick control panel
doubleclick network
click on the configuration tab
click on tcp/ip (in the white installed components box)
click on the properties button
you now have 7 tabs. write down what is in the
ip adress,wins config,gateway and dns config tabs
copy this information exactly into your computer.
next back to control panel
doubleclick internet options
click the connections tab
check the "never dial a connection"
click on lan settings (same tab)
finally check "automatically detect settings"
click ok
your done (we hope)
finally did i mention that a router is a great way to do
this


Comment