What's on your hopper???

[BTAutoMag]

This is the thread to display your hopper art. my pics not to good but i bet you recognise the pic, i bet shartly will (sig pic)

[gimp]

I used to have the hood ornament of a bmw on my hopper lid. It fit perfectly, but I gave it to my friend who lost her's off her beamer. That was a pretty darn cool ornament.

[virus]

lots of old dried up paint... esp where the screws are.... its a pain to clean in there....

also the elf likes it..... just as long as its green paint... he likes it for some reason and i get less breaks in my gun and more on the other team... go figure

[MajorDamage]

I have 2 stickers one says "100%" and right below it is one that says "Bravo" 100% Bravo. My team name is Mission Bravo

ENDO!

[wyn1370]

I've got an AGD sticker, and I shoot a timi, go figure.
BTAutoMag, how'd you get that as a sticker?

[shartley]

Thanks BT.

Wyn, I am sure he printed it out using a sticker kit. You can get them at almost any Office Supply store, like Staples, etc.

[wyn1370]

It's just some sticker paper u put in your printer right? gotta get me a sig sticker to go on the other side, now that's customized. Thanks again for the sig shartley.

[wyn1370]

I just asked Xzion if we could use the AO patch designs to make some stickers too. Maybe we should clear it with Tom too, since it is his sight.

[shartley]

Yes, that is how they usually work. One caution though, they tend not to weather very well. You can get some good art spray though and it will help the "running" problem that sometimes happens when they get wet. Also, if you carefully spray them with clear paint (or brush on varnish) it will seal them as well... BUT if you do this, it should be done on a place that does NOT flex. Because it will crack.

Of course, if you print out a bunch of them, it really does not matter too much since you can just take it off and pop another one on.

I am sure you can use some creativity. Also since I designed them the way I did, you can get a pretty close trim to he actual design.. OR make the sticker rectangle with a small black trim border, and that will look nice as well.

Have fun!

Oh, and you are very welcome.

[graycie]

i gave up on hopper stickers, they would eventually peel off.

[BTAutoMag]

to tell the truth i printed it on regular paper and used pacageing tape. works well

[shartley]

LOL Well, I'll be darned.

See, now THAT is some cleaver thinking. And now that you pointed it out, I can see it clearly. This way should work well for the side of a hopper as well. You just have to watch the air bubbles and creases.

BUT, it also allows you the flexibility to quickly change your graphics at will.

Good thinking.

[paintdevil1]

I don't have a pic but I have 1 PMI RPS paint sticker 1 WARPIG sticker and 1 Freeflow sticker

[FeelTheRT]

enjoy stairing at my hopper

[BTAutoMag]

um im no collage grad but you spell "and" with an "a" before the "n" so that it forms a word with a vowel. j/k it probable rubbed off when you were playing