Comp hardware help

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • AngelBoy
    _-=Angel Boy=-_
    • Oct 2001
    • 863

    #1

    Comp hardware help

    Started building a SFF comp a couple weeks ago. Using an ASUS micro-atx motherboard, and I put everything in its place, hooked everything up, and turned it on. Fans turn on, lights come on, keyboard lights up, cd drive will open and close, but there is no video output at all, cant even get to bios. There was also no start-up beep thing. Just figured it was a problem with the motherboard, any ideas?
    Why go to the light, when darkness has its warmth too....
    Brak "I poop in the sink."
    EPIC - Warp - 68/45 Armageddon
    Black 2k LCD
    Green 99 Dark Angel
  • Tunaman
    Specialized AGD Tech

    • Dec 2000
    • 8643

    #2
    Originally posted by AngelBoy
    Started building a SFF comp a couple weeks ago. Using an ASUS micro-atx motherboard, and I put everything in its place, hooked everything up, and turned it on. Fans turn on, lights come on, keyboard lights up, cd drive will open and close, but there is no video output at all, cant even get to bios. There was also no start-up beep thing. Just figured it was a problem with the motherboard, any ideas?
    memory in? Make sure its seated and change the slots. Populate memory slots as per board specs.
    Email me for low prices on ALL AGD Products and more. [email protected]
    Tunamart

    Comment

    • AngelBoy
      _-=Angel Boy=-_
      • Oct 2001
      • 863

      #3
      Yep, switched the memory around also. Still nothing.
      Why go to the light, when darkness has its warmth too....
      Brak "I poop in the sink."
      EPIC - Warp - 68/45 Armageddon
      Black 2k LCD
      Green 99 Dark Angel

      Comment

      • OfficerGoat
        My Liver! My Liver!
        • May 2003
        • 532

        #4
        Remove everything from the board. Just leave the processor, fans, power sup and be sure the pc speaker is appropriatly plugged in. Power it up...does it beep? No? Remove the processor, does it do anything now? If not you proboly have a dead board if so you proboly have a dead processor. Otherwise if it beeps then add your ram... beeps again add the vid card. Then you should ether get video or it should behave the same. If you get video start adding the rest of the components untill the system fails again. Good luck.
        Sig image must be under 20k

        Comment

        Working...