need help wiring subs to box....

[SIGSays]

which diagram should i use?

[eckoblazer]

all depends on what subs and amp you have. Are they dvc, 2 ohm, 4 ohm, etc and what about the amp, 2 ohm, 4 ohm? how many subs will you be hooking up?

[SIGSays]

i got 2 dub200 subs.. and a audiobahn a80002t amp...

i would wire the 2 subs together... but the porting of the box doesn't let me.... so i gotta look at them as single subs..

[eckoblazer]

can't find any info on the amp, but it should be 2 ohm stable so go with the first diagram

[SIGSays]

thanx man... you right... there 2 ohm stable..

so what kind of wires do i need for this>?

[eckoblazer]

well if you already ran an amp kit then just any speaker wire would work from the amp to the subs, i recomend something like 14 gauge. If you have not run an amp kit to the amp(power wire, ground wire, remote) then you also need to do that. for that set up either 4 or 8 guage wire would work. Lastly you need a signal for the amp, depending on if you have an after market head unit-then use rca's- or a factory one-then use a line level converter-