RPG-Force Mag

[need4reebs]

Updated me G-Force Mag again...didnt get the Internal LPR set up done yet so mad an alternative mod inspired by good 'ol Hill! using the LPR as the fore grip. took a 10 rd tube and cap, cut it to fit inside a the rubber AGD bike grip, cut a small piece of warp feed hose to keep the bottom of the grip sturdy, the 10 rd tube fits very snug inside the warp feed hose, cut a slot from the 10 rd tube to make room for the 90* barb fitting on the LPR, trimmed the inner top part of the bike grip so the hose wont kink, used a asa reducer for tha LPR, ran the LPR hose thru the G-Force frame, hooked up the Air Line prolly 5 different ways ...haha and called it a day!!!

pics:

first try w/2 separate air lines:



Second try with a messed up plumbing job...i wasnt drunk enough to to get it right this time...but tha pics show the LPR:



and finally a lot o beers later a nice clean set up...but that Brass fitting is killing me man...so ill try to find a black street T and a black straight and 90* Macro fitting to finish this up nicely:



oh hells yeah...aint modding fun...haha...hiccup?

[knownothingmags]

i dont like it.

[Cokrkilr]

"if it were me" id tap the other side of the VASA and run your fittings from the drivers side of the gun to the grip, then passenger to the valve... if you wanted to go super

[knownothingmags]

reebs got it dont worry his guns will rock

[need4reebs]

i dont like it.

awe man i better scrap it...KNM dont like it...haha...thank you sir!!!
its a Sa WeeT lil face painter man...i love this lil set up! peace big Dawg!!!

[need4reebs]

"if it were me" id tap the other side of the VASA and run your fittings from the drivers side of the gun to the grip, then passenger to the valve... if you wanted to go super

actually that was kinda how the first set up was...i just didnt put the second macro line...hey man get outta my head dood...haha...but i really didnt like tha airline set up that way...so i set it up with the T fitting to see if i like that and i do so a black T fitting is on the way so its all good!!!

its already Super yo!!! haha

[OPBN]

This is why someone needs to come up with a nice foregrip with an integrated LPR.....

I agree though, until that time arrives double tap the VASA and run in one side and out the other.

[luke]

This is why someone needs to come up with a nice foregrip with an integrated LPR.....

That's been my "next" project for months now. Just finishing up some custom work and had to do some personal work around the casa. Gonna sit down and start designing pretty quick.

[OPBN]

That's been my "next" project for months now. Just finishing up some custom work and had to do some personal work around the casa. Gonna sit down and start designing pretty quick.

Out of curiosity are you thinking about something that just houses the LPR or something with the LPR integrated? You milling your own internals or using already available ones like Palmers?

[luke]

Have not exactly decided, but with all the regs out there made by reputable companies I'm not sure if it would be worth the effort to make one myself. (Especially in the short runs I'm stuck doing ) The easiest and fastest way to market would be to make a FG housing, internal manifold, grip panels, etc.

[OPBN]

Have not exactly decided, but with all the regs out there made by reputable companies I'm not sure if it would be worth the effort to make one myself. (Especially in the short runs I'm stuck doing ) The easiest and fastest way to market would be to make a FG housing, internal manifold, grip panels, etc.

True, but you could get a smaller overall unit I would think if it was integrated vs simnply a housing.

[need4reebs]

This is why someone needs to come up with a nice foregrip with an integrated LPR.....

I agree though, until that time arrives double tap the VASA and run in one side and out the other.

if you can make your own why does someone need to come up with another one...haha
again this was just something i want to see if i could do with the spare parts that i had in the tool box...for fun not try and make any money...just fun

[OPBN]

I'd like to see something with more style and that can be anodized. Something similar to the foregrips that Luke made.

[need4reebs]

I'd like to see something with more style and that can be anodized. Something similar to the foregrips that Luke made.

make one dood...i just wanted it to work, be easy to adjust if needed as well as be able to use the bike grip...that one of my favorite grips...ol SKool Style

[OPBN]

I think Luke is on it. Wasn't bagging on your setup. I'm a fan of bike grips as well.