Here's mine. Will add more info as I find time/motivation.
My workhorse. Took a couple of years of tuning, but it now shoots ropes with the slight tickle of the trigger. Sadly it actually doesn't see much field time these days as I have been primarily been earning my chops playing pump.
Mods:
Chopped and CF modded ULE body with dual detents and A+ feedneck (I think)
To be perfectly honest, I can't remember the name of the trigger. Think it may be RPG? Has set screws.
X Valve has ULT.
I should name this one "Money Pit". Granted, it's not on the level of Bunny Money, but I have much more into this thing than I will ever probably admit to. Sad part is, it has NEVER seen the field since completion. Shot a hopper or two through it in the back yard, but that's it.
Mods:
Body is Shortened, dual detented and lower wings shaved.
Rail has been milled to death. Wings milled, back milled, custom ULE milled, Side holes milled out. Probably have $150 just in milling done to this thing. Custom E-Tac jewels
Milled ULE Emag frame with X mod. Someone had drilled a hole for a switch so had it milled to get rid of it. Lukes trigger. Older Lukes panels. Custom milled battery box.
Freak bored barrel
Probably my most prized Mag. No it's not for sale. Finally won MOTM after 2-3 tries.
Specs:
Dallara body and rail. Oddly, one of only a couple that were cocker threaded for detents.
Sleeper Pneud M90 frame. Mods done by Loguzzzz.
Lukes foregrip custom tapped on the bottom to better hide the fitting
Mike780 G-10 panels
MM2K9. Everything on this was literally brand new excepting barrel.
Specs:
PTP MM2K9 body. Yes it reaches 300fps!
VER frame
RPG Gas through
BL Gear Drive On/Off
AKA feedneck
My first pump mag in its 3rd rendition. Was a MOTM winner prior to frame and body swap. This has been essentially the only marker I have used in the past 1.5 years excepting the 15 minutes or so I played with my nemesis below...
I love to hate this marker....
Mods:
Cut, dual detented ULE body
Prototype Lukes Featherlite rail. Accepts RTP style sear with drop in pin. 1 of 1.
Sleeper modded Chimera frame. The pnues on this have given me fits on and off for a long time. I finally took out the twister lpr and put a Microrock in that proceeded to leak out of every orifice. Seems to actually be working now.
Capped and external reg'd valve
Old style AKA sidewinder.
Mike780 G-10 panels.
I keep holding onto this one. Not sure why. More or less a potential loaner. Just can't bring myself to sell it yet.
One of two current pump projects.
Second of two current pump projects.
My sol0 WGP marker. Pieced this together as a lesson in building a sniper. Again, has never actually seen the field since built.
Familyish photo. This group won the one and only "group MOTM" contest.
Yes, there is a lot of silver and black.
My workhorse. Took a couple of years of tuning, but it now shoots ropes with the slight tickle of the trigger. Sadly it actually doesn't see much field time these days as I have been primarily been earning my chops playing pump.
Mods:
Chopped and CF modded ULE body with dual detents and A+ feedneck (I think)
To be perfectly honest, I can't remember the name of the trigger. Think it may be RPG? Has set screws.
X Valve has ULT.
I should name this one "Money Pit". Granted, it's not on the level of Bunny Money, but I have much more into this thing than I will ever probably admit to. Sad part is, it has NEVER seen the field since completion. Shot a hopper or two through it in the back yard, but that's it.
Mods:
Body is Shortened, dual detented and lower wings shaved.
Rail has been milled to death. Wings milled, back milled, custom ULE milled, Side holes milled out. Probably have $150 just in milling done to this thing. Custom E-Tac jewels
Milled ULE Emag frame with X mod. Someone had drilled a hole for a switch so had it milled to get rid of it. Lukes trigger. Older Lukes panels. Custom milled battery box.
Freak bored barrel
Probably my most prized Mag. No it's not for sale. Finally won MOTM after 2-3 tries.
Specs:
Dallara body and rail. Oddly, one of only a couple that were cocker threaded for detents.
Sleeper Pneud M90 frame. Mods done by Loguzzzz.
Lukes foregrip custom tapped on the bottom to better hide the fitting
Mike780 G-10 panels
MM2K9. Everything on this was literally brand new excepting barrel.
Specs:
PTP MM2K9 body. Yes it reaches 300fps!
VER frame
RPG Gas through
BL Gear Drive On/Off
AKA feedneck
My first pump mag in its 3rd rendition. Was a MOTM winner prior to frame and body swap. This has been essentially the only marker I have used in the past 1.5 years excepting the 15 minutes or so I played with my nemesis below...
I love to hate this marker....
Mods:
Cut, dual detented ULE body
Prototype Lukes Featherlite rail. Accepts RTP style sear with drop in pin. 1 of 1.
Sleeper modded Chimera frame. The pnues on this have given me fits on and off for a long time. I finally took out the twister lpr and put a Microrock in that proceeded to leak out of every orifice. Seems to actually be working now.
Capped and external reg'd valve
Old style AKA sidewinder.
Mike780 G-10 panels.
I keep holding onto this one. Not sure why. More or less a potential loaner. Just can't bring myself to sell it yet.
One of two current pump projects.
Second of two current pump projects.
My sol0 WGP marker. Pieced this together as a lesson in building a sniper. Again, has never actually seen the field since built.
Familyish photo. This group won the one and only "group MOTM" contest.
Yes, there is a lot of silver and black.
Comment