*Official Automag Pictures*

[1985phenom]

No. The valve is from a Hawaii ULE. It has a lvl10. The mag that the valve is in was purchased on a Facebook B/S/T page.

[syne']

[going_home]

Interesting setup, can you hit anything with it ?

Looks like it would be very front heavy....

[syne']

Interesting setup, can you hit anything with it ?

Looks like it would be very front heavy....

so I finally got to try it out yesterday.... with 12hrs of gameplay I had no problem with the weight on my wrists.
These tanks weigh nothing. But the forward weight did affect my shots a bit, since theres no support on the back side of the
marker it would bounce around on rapid fire.

im gonna keep playing around with different drop forwards thought. :P

[lvl10LastBoss]

Can't wait to use this mag out on the field. Also a new black freak back wouldn't hurt.

[Syko89]

First pump mag

[Korso]

[swe_crazy]

[jetskipml]

ver chord. anno done by caustic

DSC_5312 by

[MynaBird]

So much fun.

[Hyperu2]

Good to be back.

[ElPanda]

[tucson.az.jbreen]

ill


Edit: I have the chrome vertical asa to swap, but the asa is shorter, and there is play.

I need a shorter screw for the asa. Ace hardware did not have it? any ideas?

[Nobody]

ill


Edit: I have the chrome vertical asa to swap, but the asa is shorter, and there is play.

I need a shorter screw for the asa. Ace hardware did not have it? any ideas?

Get longer correct threading screw that threads into the ASA. Get a nut(or 2) that threads onto the screw. Thread nut onto screw. Use 2nd nut to lock the 1st nut in place(you do not need this, but it can help). Use the nut as marker to the desired length of the screw. Grind off excess screw length to the face of the nut. Unscrew nut a few times to rechase the threads. Test in ASA and with rail. Repeat as necessary till you get want you need.

Custom length screw

If that is too much, then skip ACE and vo to your closest Fastenal store. They have a bigger selection. 8f that doesnt work, LMK

[BIG BOB]