Can anybody here mill an ion frame to fit up to automag rail?
Can anybody here mill an ion frame to fit up to automag rail?
they flush fit without to much trouble, just make a new front frame screw hole...
(super_stanchy)
http://www.youtube.com/watch?feature...&v=SPbQzj9ejBA
OR...
(Robertsr)
you could hide a full automag inside an ion body/frame for an ultimate sleeper
http://www.mcarterbrown.com/forums/d...y-got-ion.html
or you could do what i did and drop a hacked up rail into a broken ion
don't have one of the two parts together but i'm sure you can line the cuts on the frame with the rail...
Last edited by river031403; 01-24-2014 at 10:59 PM.
Are you thinking pnueMag for this project?Seems pretty doable.If you can find an aftermarket Ion frame for cheap they may be better,most have alot more space inside,the NDZ Scorpion frames a huge inside compared to stock ones.
If you need any measurements of anything PM me,I've got a ton of Ion stuff
PM replied,sorry no Epif frames
Any reason the mech 3way on a pnueMag can't be replaced by the Ion solenoid 3way?
you should mount the sear in the frame and skip the rail.
Ok so qloader or bt rip clip to feed this need opinions
A little update
1.custom rail to match length of epiphany frame at the front
2.moded frame to fit
3. Shortened sear pin
Put air to it!!!!
http://youtu.be/vRtiYFAMjpU
is it comfy?
are you using 10 rnd tubes? I see the sc feed gate
I love it! I was thinking about adding an intelli frame to my mag but this caught my eye. When you mentioned milling the rail, was that just for esthetics to match the epiphany frame or for mounting purposes (aligning the front frame screw location)? How did you modify the sear pin (i.e. how and what is the new length)?
Thanks man.
Yes I said milling because at that point it was just a thought of building this and I didn't know what was needed so I was seeking information. All I did was buy the epiphany I mocked it up with rail and body and drilled a new frame screw hole bought some longer screws at Home Depot cut them down to size.
I got the sear mod from Luke's customs and I shortened the sear pin by twisting the threads so that there is a small gap between trigger and sear pin when gases up. I also sent my frame to Luke so he could make a rail to match length of trigger frame.It shoots great asa leaks at npt threads of macro and 10 round tube was just for testing I'll be picking up a hopper soon.
http://youtu.be/eFL_tXA-loo
Did the revi warp mod the gun is complete!
http://youtu.be/L5TfUPDaoPw
Last edited by river031403; 03-01-2014 at 04:43 PM.
Pardon the ignorance but what is the angled “drop kick” “C” shaped ASA adapter that you are using?
Update Xvalve lvl10 ult kinda walkable! I have to fine tune it a bit more
http://youtu.be/rM0xo177fMM
pretty freaking cool.
new stuff is always nice.
Thank for this video I swapped on/offs this is rt on/off not sure of pin length haven't measured it yet
http://youtu.be/AYjse600zns
now that's awesome.