Prototype Vert and Power Feed Main Body NEED FEEDBACK!!

AO Research Team. Once again I am calling on you to help in a development project. The HALO research is showing that vertical feeds on ALL guns do not have as good ball control as power feeds. This is why you see the power feed Emag shooting 16 BPS in the HALO videos and no others. We realize you like the vertical feeds because it centers the hopper on the gun with no bias on which side of the bunker you shoot from. Here is our solution, a combination power and vertical feed that offers the be...

...

Originally Posted on AutomagsUK.com * Note - The Level 10 bolt upgrade will install on any AGD marker not including the Sydarm. __________________________________________________ __________________________ 1. How Does it Work? 2. Superbolt II Cutaway and Information 3. Fast Start Assembly Instructions 4. More Detailed Assembly Instructions 5. Fine tuning Hints 6. Problems you May Encounter 7. What to Expect __________________________________________________ __________...

Here is a running list of all the Stainless Steel bodies AGD produced. ...

The valves you have all been waiting for are in the store now! We can't guarantee that the colors will match whatever color you have but, the pic is pretty accurate. These have the high X's so xmag guys beware.

AGD

Valves in Store


...

Shifting ideas about grips brought the Z-Grip back in a slightly different form.


Original Packaging:

...

...

ULE on a diet:
http://www.warpig.com/paintball/tech...tomag/ulediet/

AO Collectors, In another thread we were looking at a Pro Mag that was made by John Sosta in the early nineties and I got to thinking about the rarest mags out there. This is a great story..... In the mid-nineties we were trying to come up with a way to lighten the Mag without compromising the strength. Aluminum didn't seem like a good choice and since we were all about quality, we figured the best and COOLEST thing to do would be to make the valves out of TITANIUM. After much res...

Idea ahead of its time. No one could figure out why the grip should angle forward. Years later WDP introducted the 90 degree grip on the IR3 and suddenly it was accepted. Only 400 made, now a collectors item.

The New Z-GRIP for AUTOMAGS and RT's Airgun Designs is pleased to announce the availability of our latest accessory, the Z-Grip. This radical new design puts the wrist in proper alignment when holding the marker in a tight shouldered position. Designed for ...

...

Bling Bling Products: Automag Body


Z-Body:



Deadlywind:
Proteam Products:
Xmagterror:
I.T
PBX
Fetus
Venomous

Flatline Regulator:
http://www.warpig.com/paintball/tech...ne/index.shtml

[ATTACH=CONFIG]95256[/ATTACH]
The world's first completely integrated regulator, bolt, and valve system with the added benefit of no tools disassembly. The first valve system to use a blow forward concept and regulated

...

Level 10 Kit:
http://www.warpig.com/paintball/tech...tomag/level10/

[ATTACH=CONFIG]95259[/ATTACH][ATTACH=CONFIG]95258[/ATTACH]

[ATTACH=CONFIG]95549[/ATTACH]

AO: Here is another rare S/S body for the AO Archives. There have been many different variations of S/S bodies to come out of AGD, but one of the most influential has to be the Automag Classic RT "Vert Feed" body. Below is a video from Simon Stevens talking about the very first Automag RT Classic Vert Feed to be created.

If you are interested in finding out some more information, feel free to send him this article Throughout my research I have also found another ...

Guys,

You have all been wanting to know exactly how to hook the Intelliframe to the Rev. Here is what we have so far in the picture story. This is not complete with text descriptions