E-Mag Tech question

[varq]

I had the same exact problem when I did this .... Here is what I found out
1) the ULT works great!!!! MUCH Better than the stock on/off
2) My problem was that the sear length was off.... it needs to be measured

I had to send it into agd... For $20 bucks they adjusted and tuned it to perfection!

that was it.. (the safety has no impact)

good luck

[Twistedpsyche]

I had the same exact problem when I did this .... Here is what I found out
1) the ULT works great!!!! MUCH Better than the stock on/off
2) My problem was that the sear length was off.... it needs to be measured

I had to send it into agd... For $20 bucks they adjusted and tuned it to perfection!

that was it.. (the safety has no impact)

good luck

Cool, I'll look in to that. Thanks for the info.

[xxkylexx]

Cool, I'll look in to that. Thanks for the info.

Could also try http://modmymag.com to get a tune up.

[Twistedpsyche]

Could also try http://modmymag.com to get a tune up.

Yeah, I was considering that, but I am kind of a do it yerselfer as much as possible.

BTW is THIS the correct on/off? It looks like it, but the length is not what everyone described above.

Thanks.

[athomas]

This is the proper emag on-off assembly:

http://store.airgundesignsusa.com/index.cfm?fuseaction=catalog.prodInfo&productID=205&categoryID=24

If you only need the pin, it is:

http://store.airgundesignsusa.com/index.cfm?fuseaction=catalog.prodInfo&productID=395&categoryID=24

[Twistedpsyche]

Excellent. Once again, thanks for the info, you guys are great.