Here's what my gun sounds like what's the problem?

[GallagherAtWar]

whats wrong? i played to day and it was horrible! it was double feeding it was inaccurate every thing stunk about it

here's what it sounds like, and maybe this will help but it might not it's hard to tell

note: i had to convert it to zip fromat

[MAGS own YOU]

Is your velocity too low? Turn it up. Is your reg seat messed up? Replace it. Are you using aftermarket parts? Loose them? Is there something blocking the flow? Fix it. Take your gun all apart and clean all the seals, then put some oil in the asa and dry fire it like 30 times. Check your valve pin and spring. There might be some teflon tape in there or something.

[GallagherAtWar]

what is that sound? is it called farting or is called drop off

[BlackVCG]

Well, which sound are you refering to? The sound of each shot, or the weaker sound it makes in the middle of your string? The sound of each shot sounds weak, which would be called farting. The weak shot in the middle of the string is called short stroking. Do what MAGS own YOU suggested and then report back.

[Exodus]

try turning up the velocity of useing a full tank. its called farting

[GallagherAtWar]

• Is your velocity too low? no
  
• Is your reg seat messed up? what you mean? no it lookes ok there arn't any nics in it and it lookes fine.
  
• Are you using aftermarket parts? no
  
• Is there something blocking the flow? no not that i know of
  
• Take your gun all apart and clean all the seals ok, then put some oil in the asa and dry fire it like 30 times.ok
  Check Valve pin and spring whats that? is that the pin thing with a spring behid it?
  
• There might be some teflon tape in there or something. no

i had cheaked all this before and then again so something eles i wrong

Chris

[Exodus]

have you checked that your on/off is in the right direction?

[GallagherAtWar]

my on/off? the on/off pin is ok and so is the other stuff in the on off valve

i do how ever have a free flow valve thing in my on on/off piece its a brass piece and it is not stock

I bought the gun used so i dont know what it is but it looks like a free flow valve
and the triangles ar pointed down


Chris

[Exodus]

well, i are stumped. im fresh out of ideas.

[MAGS own YOU]

Bingo, triangels must point up. Have the same valve and had the same problem, you should have told me you where using aftermarket parts in the first place..

[BlackVCG]

Can you take a picture of your on/off valve?

[paintbattler]

u shooting co2 or n2? if its co2.thats the prob.if nitro then i have no idea

[ciaran.mooney]

Try cleaning your hoses, if you use Co2 then dirt that might have been in the tank might have gotten lodged in in the hoses and is chokeing your mag.

[GallagherAtWar]

I got nitro

[GallagherAtWar]

Thanks "MAGS own YOU" you got it right now my gun is great no wonder it was sucking so bad!!

thanks a bunch