Here's what my gun sounds like what's the problem?

[max-mag]

Just buy an automag/minimag parts kit, it comes with a few of every O-ring and 2 nubins and a bolt spring and bumper, just replace ever O-ring, make sure your Power tube spacer and Power tube O-ring are at the very bottom of the power tube. Then, oil the outside of the power-tube so that the bolt can slide freely.

[GallagherAtWar]

i said Mags Own you fixed it

i already had replaced all the orings

[Tim Jacobitz]

it just goes to show you aftermarket is not better. I hope your gun is flawless now. people around hear will harsh on you for after market parts. I got it bad for using an ans venturi bolt in my mag.

[GallagherAtWar]

what does a free flow valve do? OR what is it supposed to do?

[MAGS own YOU]

Increase flow rate, give the trigger a stifer realese. The typical after market stuff. I like mine, it actually worked.

[GallagherAtWar]

what you mean gives the trigger a stifer release?

[2UnREal]

Kinda like RT but just wannabee.

[GallagherAtWar]

Cool my mag does that! Not well, but i do feel it! cool!

i was on the AGD store and it said not to replace the on/off top (the thing in the on/off valve thats brass looking) with aftermaket parts, why?

[BlackVCG]

Because it's a precision machined part that if made improperly will cause shootdown and possibly other problems. Aftermarket parts generally don't hold tolerances within the acceptable limit for ANY gun so that's why most aftermarket parts are worse or just as good as stock parts in most cases. It would help if you just bought the AGD on/off top and used that. If anything, it will make the gun work better and you don't have to worry about putting it in the right way.