i have experience this before,, this is caused by a lil tiny bit of bolt stick not usually noticeable but because of the stick it takes longer to rest therefore only noticeable at higher rof. Just tune your lvl X alot more,swap to lvl 7, also makesure the tolerances of the body and rail sitting with the valve are all correct because if that valve isnt sitting on it perfectly it will cause stick, this is why xmags 1 piece instead of 2 are alot easier to setup
X Valve chuffing when rappid firing
Collapse
X
-
-
muddshutter
CALL ROMAN AT AGD,
he will help you and get it right for you. I had the same problem, in a few short chats, it was fixed.Comment
-
Originally posted by muddshutterCALL ROMAN AT AGD,
he will help you and get it right for you. I had the same problem, in a few short chats, it was fixed.
do tell how your issue was fixedComment
-
Full auto crazy mag
OK. An update. Today I put some air into it again and, guess what. It went full auto just by turning the air on. Didn't need to pull the trigger and the thing was firing at over 50 bps
I then took the valve out into my splash classic body (single trigger, mech mag) and it was going full auto just by pulling the trigger. I opened it and saw that the ULT had 5 shims inside it. Took 3 of them out but ran out of air. Tomorrow I'll be at a small champ here (20 teams, all amateur) and will test it again. But it was funny...Comment
-
went an played at a field today, i had my emag set to 13/sec and people thought i was shooting 20, i turned it to 20(not with paint cause my wallet..) needless to say i was gunned for the rest of the day.Originally posted by mpsdOK. An update. Today I put some air into it again and, guess what. It went full auto just by turning the air on. Didn't need to pull the trigger and the thing was firing at over 50 bps
I then took the valve out into my splash classic body (single trigger, mech mag) and it was going full auto just by pulling the trigger. I opened it and saw that the ULT had 5 shims inside it. Took 3 of them out but ran out of air. Tomorrow I'll be at a small champ here (20 teams, all amateur) and will test it again. But it was funny...Comment
-
That's a good thing. Mine isn't working though...Originally posted by Ruler_Markwent an played at a field today, i had my emag set to 13/sec and people thought i was shooting 20, i turned it to 20(not with paint cause my wallet..) needless to say i was gunned for the rest of the day.
But yes, 13 BPS is more than enough for anyone. That's why PSP and Millenium put "new" limits to the guns. Now, funny thing is: wasn't that same limit "imposed" as an industry standard, back in day when Tom and the Gardner brothers were launching both the e-Mag and the Shocker 7 years ago? Now, just pretend I didn't write that last sentence, otherwise I'll miss my thread to one more "Tom was right from the very begining" discussion (I know, I know, he was...).Comment



Comment