emag full auto problem

[phizz]

-Raise your dwell. 15-30.
-DONT set your ROF above 20.

Report back your settings.

I second this. I had a couple emags that wouldn't run with a dwell less then 20

[dark blade]

ok i will check all these things.. however when i put the dwell to 30 it will not fire in full auto or even when i walk the trigger at a respectable speed.

[dark blade]

sear looks pretty respectable... would firing the marker witht he safety on and no air just to "solenoid click it" do any damage to the gun?

i am not sure how much of apoint it is suppose to come to but it looks pretty good and feels pretty good

[dark blade]

alright guys i am gonna check in now about this issue

today i had a tourny and got there at least 2 hours early so that i could mess around with the mag and tune it... I started with the gold spring and fine tuned the level 10 which had 3 shims and was chuffing a bit so i added 1 more shim and it wouldnt fire 90% of the time, so i went back to 2 and it was perfect.

so then i moved on to the springs, i started with the gold spring and it was good there was no chuffing but there was extremely terrible efficiency so i went to the next spring the red one, i got decent efficiency but it was chuffing every once in a great while so i went to the longest springs and it worked magnificintly (sp?)

so i went on the field and was immediately outshooting my friends egg and it wasnt consistant enough of a feed... i would hear the occasional noise as though the gun was dealing with a ball that didnt make it all the way in. so i was very happy with that

the emag is running flawlessly now and i just have to tune the dwell in order to get it more consistant