RT-X Pro mag huge leak

[georgeyew]

I'll try to take a look at it on Friday. In the mean time don't tinker with anything else

[PbGunTrader]

I have a few extra orings, all sizes of power tube spacers, springs, and trigger pin things.

Will do George :) Won't touch it till Friday.

Right now the only real problem is the bolt sticks forward.

[secretweaponevan]

EDIT: Sobered up.

As said by others, it sounds like your LVL 10 just needs to be tuned:

Remove all LVL 10 shims.
Pick 1 carrier o-ring and stick with it.
Use oil.
Use #2 carrier (2 lines, no dots, or largest one you have).
Shoot 1000 shots to break in o-ring.
Move broken-in o-ring to largest carrier that doesn't leak.
Use red spring for 285 fps. Use longer spring for higher velocity or to be more gentle (fragile paint), shorter spring for lower velocity or to be less gentle (thicker shell).
If bolt sticks after encountering a jam, add a shim.

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/V0mvr30jKhw&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/V0mvr30jKhw&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

[georgeyew]

Looking at the mag now. It seems like the ULT on/off issue, When I screw the tank in, the bolt automatically goes forward without even touching the trigger. Seem like the on/off is not regulating the air properly. I am looking for an online diagram of the ULT now.

[PbGunTrader]

thanks to George I was finally able to get it up and shooting.

Works great! Thanks AO!!

[georgeyew]

It turned out to be a detent that was sticking too far into the breech and whenever the bot went forward, it would get wedged and not reset.

I still don't know why the bolt was moving forward previously without touching the trigger, but oh well, the mag is shooting sweet now so don't mess with it. Now you need to go get a new Angel detent :)