Apocalypse 2K help

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • MntlHazrd
    im just here for the food
    • Sep 2005
    • 51

    #1

    Apocalypse 2K help

    Bought an Air America Apocalypse 2K reg not too long ago and i aired it up for the first time today. Once i turned it on it started leaking out of the adjustment nut. I checked the orings and seals and everything seemed fine. A friend put some lube on the orings and seals and then i went to air it up again and had the low pressure burst disk blow (?nut screwed in too far?) My main question is where can i find a low pressure burst disk for the reg. Any other help would be greatly appreciated.
  • MntlHazrd
    im just here for the food
    • Sep 2005
    • 51

    #2
    Hmm, my next question then is what are the ratings for both of the burst disks on the apocolype 2k reg

    Comment

    • Shane-O-Mac
      Registered User
      • Sep 2002
      • 1045

      #3
      If its leaking out the adjuster, your piston o-ring is bad. Burst discs are the same rating as standard ones, if you blew that one while filling, you may have a bad seat. Rebuild it and go from there. Heres alot of info for you, go there and read.

      This is the forum for trouble shooting your Airgun Designs products, including the Automag, RT, E-Mag, and WarpFeed. Also a great place to ask technical questions about non AGD products. An Airsmith's homeroom!
      I have nothing good to put here...........


      Comment

      • MntlHazrd
        im just here for the food
        • Sep 2005
        • 51

        #4
        To eliminate assumption it would be a 1.8k for LP and about 7k-7.5k for hp?

        Comment

        • Shane-O-Mac
          Registered User
          • Sep 2002
          • 1045

          #5
          Originally posted by MntlHazrd
          To eliminate assumption it would be a 1.8k for LP and about 7k-7.5k for hp?
          Sounds about right. Just ask for a LP disc and you will be fine. All systems use the sane rating if I recall correctly.
          I have nothing good to put here...........


          Comment

          Working...