It was more of an issue with the standard bolts due to the ball being able to roll back into the face of the bolt. This allowed the next ball in the stack to be able to be hit by the bolt as it came forward, thus cracking the shell on the ball. The level 10 starts this forward action slowly and it is no longer an issue. A lot of bolts on the market are open face.
-
Except for the Automag in front, its usually the man behind the equipment that counts. -
Foamies are for sissies
Measure your on/off pin it should be .712, I believe, if its been shaved down, as mine has, lol, it will be very reactive, even at 850 psi, depending on the valve, now you shim up a preset reg to 1100 or get an adjustable....bwahahahahahah
But that's only when I'm being a big meanieBEO MAFIA
sigpicComment
-
So I'm pretty sure the pin is alright. I was using it without the foamie and it was shooting fine (well besides the hyper reactivity I mentioned earlier), then it just abruptly stopped firing altogether.
I stripped the valve down all the way, and when I opened up the on/off and the smaller of the two rings between the on/off assem and the body (the ones that go around the on/off pin) was trashed. I'm wondering if that o-ring getting twisted and destroyed might have been what was causing it to fire double and triple shots.
Does anyone happen to know what the name of that o-ring is so I can order a new one from Magsmith or the Airgun? It's a smaller black o-ring that fits inside of a larger o-rings and goes around the pin between the valve body an the on/off assembly.Comment
-
yes , if it was sticking
Quad ring
Comment
-
That would definately cause multiple shots.Originally posted by WarHamsterExcept for the Automag in front, its usually the man behind the equipment that counts.Comment
Comment