some one who has installed the boo yah elcd plz read and help!!!!!!

[wicked_mag]

OK i have tried to get my elcd frame to work, i have removed the bottom part of the sear, put in that on/off pin thing and that thing with the little holes thats a copper color that goes before it but then it won't go back together, the pin hits my sear and the sear is all the way down so it won't work???? what do i do plz explain exactly how to install it!!1

[56kSomeGuy]

I'm trying to help but I have no idea what you are talking about. What is not working??Installing the new

How to install the boo-yaah frame

The installation is nearly as easy as changing the grip frame on your paintball marker.

Tools needed:

1/8th allen wrench
5/64 allen wrench
needle nose pliers
10- fingers, 2-hands (These are optional)
1. Remove the field stripping screw from the marker.
2. Remove the Automag trigger frame screw from the rail.
3. Take the trigger frame of the rail mainbody.
4. Remove the sear assembly from the rail mainbody.
5. Remove the trigger rod from the sear.
6. Grab the clevis with the needed nose pliers, very carefully pull the clevis apart and see which way it releases. (hold the sear very firmly with your fingers). Both sides of the clevis will flex. Please do not pull too hard because it may bend the clevis, therefore possibly causing damage to the pin.


7. Now with a pull of the clevis and an opposite pull of the sear, the pin and clevis should separate.
8. Drop the sear back in the rail mainbody

[wicked_mag]

no i no that i have those directions i need about the on off pin thing that comes with it and how to switch that. Cuz i installed the parts that came with the booyah but i can't put the body and the bolt back onto the rail cuz the on off pin hit the sear down as far as it can go and the pin needs to go farther down but it can't cuz the sear doesn't go that far

[56kSomeGuy]

So you are saying the on/off pin is longer than it suppost to be and won't allow you to put it back together?

[wicked_mag]

yea

[56kSomeGuy]

The only option is to get a new on/off pin or you can try to cut the pin a little(only if you know what you are doing cutting could cause the pin to become useless) so that it doesen't push the sear soo much. That's all I can think of right now to fix your problem.

[wicked_mag]

ok i got the boo yah on, now i got it to shoot, but in semi i would pull like 8 time and only 2 of them shot? whats that and if for some reason i only hit the trigger halfway it sputters??? whats wrong???

[soilent green]

you need to adjust the soliniod

[wicked_mag]

how do i do that??????

[56kSomeGuy]

Hold the f1 and f2 bottons untill you see a menue saying pulse length then let go this will bring up a pulse length menue which you can adjust to make the pulse more powerful.

[wicked_mag]

ok but what about it leaking when i only pull the trigger halfway????

[56kSomeGuy]

Where is it leaking and how can you pull the trigger half way?

[wicked_mag]

lol i duno somehow it like gets stuck halfway sometimes and when it does air slowly leaks out!

[56kSomeGuy]

Most likely this is being caused by the on/off pin. Check it.

[wicked_mag]

what can i do to make it work better?