EGOMAG Trouble, help please

[knownothingmags]

I have only had one of these noids go out on me. It was due to a massive pressure spike. I blew my LPR and.........

......?

blew the lpr?

im not new to doing this im just new to having issues like this.


something simple like plug the computer in?

you know what i mean?

[need4reebs]

how about this maybe this will shed some light.


maybe answer my issues with this build.

cant really tell from the pics? maybe clip the ends of each hose and reattach them to get a tighter fit, make sure there are no kinks in the hoses...the kink will either stop the air flow, or possibly cause a spike in pressure if it un-kinks it self...just like a water hose? but cant see the hose connections or tha lpr or the way its setup in the frame from the pic???

[knownothingmags]

cant really tell from the pics? maybe clip the ends of each hose and reattach them to get a tighter fit, make sure there are no kinks in the hoses...the kink will either stop the air flow, or possibly cause a spike in pressure if it un-kinks it self...just like a water hose? but cant see the hose connections or tha lpr or the way its setup in the frame from the pic???

its a video

and of course now that im out of air, it doesnt vent. lol
it has enough air to get the ram to go iny outy.

[renie]

Defo sounds like an lpr issue those tiny noids can be sensitive I've had them vent at 50psi before
Try swapping the lpr 1st if that don't work i would say it's a noid issue.
If u run a ULT it will lower your operating pressure to

[knownothingmags]

Defo sounds like an lpr issue those tiny noids can be sensitive I've had them vent at 50psi before
Try swapping the lpr 1st if that don't work i would say it's a noid issue.
If u run a ULT it will lower your operating pressure to

i had the lpr back out (counter clockwise) all the way and still vented, this hapened for two of my 4 noids.

i hope its not the lpr, i had it stripped and reanoded to match.
we will se when i get two more bottles of air tommorow.

f#*$#*$#$*#$*#$* i need a shoebox.

[need4reebs]

i had the lpr back out (counter clockwise) all the way and still vented, this hapened for two of my 4 noids.

i hope its not the lpr, i had it stripped and reanoded to match.
we will se when i get two more bottles of air tommorow.

f#*$#*$#$*#$*#$* i need a shoebox.

didnt realize it was a video...sorry bout that big Dawg!!! if it was venting when the lpr was backed all the way out then either the noids are bad or the lpr is just letting the full pressure from go to the noids...should always make sure it works before anno...so you dont run into possible problems like this...you know???

[knownothingmags]

didnt realize it was a video...sorry bout that big Dawg!!! if it was venting when the lpr was backed all the way out then either the noids are bad or the lpr is just letting the full pressure from go to the noids...should always make sure it works before anno...so you dont run into possible problems like this...you know???

they worked. lol. trust me.
hmmmm im going to have to ask the techs in town if the forum cant help lol.

dont get me wrong you guys are helping i just need to get air to confirm.

[need4reebs]

just watched the video and thats weird man! lpr cant be all the way backed out and still out put air...its supposed to not let any air pass thru? do you have some spare air fittings and a 0-160psi gauge to build a lpr tester for when you do get air???

[knownothingmags]

just watched the video and thats weird man! lpr cant be all the way backed out and still out put air...its supposed to not let any air pass thru? do you have some spare air fittings and a 0-160psi gauge to build a lpr tester for when you do get air???

i know why im getting full air preassure lol.
ill check in tommorow.

duh im dumb

[need4reebs]

they worked. lol. trust me.
hmmmm im going to have to ask the techs in town if the forum cant help lol.

dont get me wrong you guys are helping i just need to get air to confirm.

its either the noir, LPR, or tha mag is pissed caused you stripped it....it prolly liked its original color??? just kidding!! you dont have a scuba tank???

[need4reebs]

i know why im getting full air preassure lol.
ill check in tommorow.

duh im dumb

why is that???

[GEE TEE]

Sounds like LPR issues to me and possible noid damage

What dwell do you have the board set at, and does the X run the stock on/off or ULT?

[knownothingmags]

Sounds like LPR issues to me and possible noid damage

What dwell do you have the board set at, and does the X run the stock on/off or ULT?

ULT
but i was just dry firing the ram no actual use in the gun yet, since the noids started venting right off the bat.


Every one***
what does it mean when the micro rock is backs all the way out and it is still letting air go by?

[knownothingmags]

so my oring for my micro rock maybe fudged and is letting full preasure air through

lol 100$ of busted noids so far im guessing.

i need to get air tommorow and ill test things out with a good lpr and a good noid.

im in a good spot to start getting things fixed.

[need4reebs]

try running oil through the rock to grease up the insides, adjust the pressure all the way up and then back it out all the way with out it connected to the noir

sometimes the noid will vent like that so it wont over pressurize...a lil safety mechanism but it if keep happening it will blow up tha noid

still test out wat ever noid you were just using to make sure? if its bad try another one ?