ULT = sear not catching

[nak81783]

It makes the air enter the dump chamber via its intended path - through the on/off. Since the seal was bad, the air could enter the dump chamber backwards - through the hole in the center of the reg pin assembly. In essence, with the bad seal, your marker could not turn air flow off to the dump chamber.

Sorry it took so long for me to think of it. I actually just recently told someone else to replace that, and it solved part of his problem. My bad.


-Nathan

[need4reebs]

It makes the air enter the dump chamber via its extended path - through the on/off. Since the seal was bad, the air could enter the dump chamber backwards - through the hole in the center of the reg pin assembly. In essence, with the bad seal, your marker could not turn air flow off to the dump chamber.

Sorry it took so long for me to think of it. I actually just recently told someone else to replace that, and it solved part of his problem. My bad.


-Nathan

dood its actually a real good thing that it took awhile to think of it...in fact the mag was diagnosed and fixed pretty quick...considering the mag is not in your hands. seriously this was like a Mag 101 class with a lot of knowledge taught as well as learned! too bad not all the trouble shooting threads are like this. usually someone will post, get a few tips on fixing their mag, and then they just disappear...no thank you, no telling what the fix was for the next person that has the same issue.

this thread was Sa WeeT Dood...haha!!!

[Mic0157]

dood its actually a real good thing that it took awhile to think of it...in fact the mag was diagnosed and fixed pretty quick...considering the mag is not in your hands. seriously this was like a Mag 101 class with a lot of knowledge taught as well as learned! too bad not all the trouble shooting threads are like this. usually someone will post, get a few tips on fixing their mag, and then they just disappear...no thank you, no telling what the fix was for the next person that has the same issue.

this thread was Sa WeeT Dood...haha!!!

I appreciate all the knowledge floating around. There wasn't an Internet the last time I was troubleshooting a mag. I'll be referring to this link in the future if something goes wrong.

Thanks again

[need4reebs]

I appreciate all the knowledge floating around. There wasn't an Internet the last time I was troubleshooting a mag. I'll be referring to this link in the future if something goes wrong.

Thanks again

just tin cans and string to communicate back then huh....haha

[Mic0157]

Pretty much

[need4reebs]

Pretty much

glad you got your mag shootin again!!!!

[Mic0157]

Yeah me too. Now I need to see what the tank is putting out. But that's enough troubleshooting for this thread.

[need4reebs]

Yeah me too. Now I need to see what the tank is putting out. But that's enough troubleshooting for this thread.

what kind of tank do you have?