Good ball detents?

[Spiritchaser]

Looking for some ball detents, not really sure what my options are these days.

This would appear to be the default:

http://www.ansgear.com/Custom_Products_Angel_PRE_2005_Ball_Detents_Pewter_p/cpangelbdetentpewter.htm

I guess there are also kila detents, though I have no reason to think they're better or worse

Any suggestions appreciated, thanks

[El Zilcho]

I am here to declare that the Automag ball detents that Kila sells are not the correct threading, they will fit but in my opinion not as they should.

[OPBN]

I am here to declare that the Automag ball detents that Kila sells are not the correct threading, they will fit but in my opinion not as they should.

Weird. I had one in a Mag I had a long time ago and it seemed to fit perfectly.

[vintage]

which one is it that AGD sells?

[Spiritchaser]

Not sure. Got some black ones coming from them, but I'd also like to find red, green and I'm considering possibly pink for my wife...

[ElecTROkiLLer]

I just bought that same angel cp detent from ans, it didn't fit at all. Search ans and you will find the cp detents for autococker witch I believe to fit.

[El Zilcho]

Perhaps, it was premature to make a declaration, but I can say that the set that I received were labeled as angel/automag and they were very loose when I tried to thread them in. They eventually did tighten to the point that they would stay in the body. I took one of the detents and it thread perfectly into my Bob Long Defiant. I checked with a second set of detents labeled as angel/automag and they did not fit. I suspect that Kila made a mistake somewhere and confused the angel/cocker threaded detents with the angel/automag threaded detents. I spoke with their customer service rep and they tried to help but I never did get the correct threaded detents.

[Spiritchaser]

I just bought that same angel cp detent from ans, it didn't fit at all. Search ans and you will find the cp detents for autococker witch I believe to fit.

Oh dear, that's quite... Disturbing...

Has anyone else had issues with the ans detents?

[captian pinky]

from what i have heard angel and cocker detents are close maybe they mistook a batch.

[Cali_Mag]

Ive bought 6 cp detents. Unhappy with them is an understatement. Only product I don't like from them. All 6 detents I had broke, first 2 shot the detent balls out. Heard from a friend to put a oring around em so they don't fit so deep into the body. so I ordered 4 more. Guess what, 3 of em shot the detent balls out again, and the 4th one managed to turn the spring inside sideways...Ive never had any issues with the stock AGD Detents. However I did order 2 kila detents for my VD body and put them in 2 weeks ago. No threading issue with em at all, and everything has been on point.

[Nobody]

I just bought that same angel cp detent from ans, it didn't fit at all. Search ans and you will find the cp detents for autococker witch I believe to fit.

either the packaging or products got switched, or the body was forcibly cross-threaded for the cocker detents. this happens with angel/ion/ICD threaded feednecks and how they are close to the same threading but a sticker might have come off it.

the bodies are threaded for Angel detents. when in douct, order from AGD/Tunaman and get the right product. if you happen to have either an Angel or a cocker, you can check them against them, just to be sure.

[ElecTROkiLLer]

Mis package might be the case. I tried it on three different ule body's with all the same results. Stock age detents worked fine, only the cp appeared to be incorrect thread.

[Spiritchaser]

the bodies are threaded for Angel detents. when in douct, order from AGD/Tunaman and get the right product. if you happen to have either an Angel or a cocker, you can check them against them, just to be sure.

You wouldn't happen to know if they ever stock colors?

[OPBN]

You wouldn't happen to know if they ever stock colors?

Any color you want as long as its black.

[Justus]

Yeah the AGD detents are the best, but the burn on them is that they're only available in black. An option is to get the RPG Re-Tents (rebuild-able ball detents), and then have the cover anodized whatever color you want.