new to automags

[Tunaman]

1200 PSI is the most fun.

It is also very dangerous too. 1200psi will slice you open like a hot knife through butter. Be careful.

[juit]

It has a red spring installed, how do i install the lvl 10 bolt? And how do i tune it

[Cyco-Dude]

It has a red spring installed, how do i install the lvl 10 bolt? And how do i tune it

it's probably already installed, from the looks of it. air it up. does it leak? no? then it's probably good to go! there is a large level 10 thread in the tech forum for all your level 10 needs. spend some time and read it.

[Laku]

Specifically, read this post by Athomas. (links directly to that post)

[Cyco-Dude]

Specifically, read this post by Athomas. (links directly to that post)

lol, it's a good post to have bookmarked for just such an occasion, eh? :P

[juit]

I think it has a ans bolt or a venturi, some one told me to install the double trigger, opened the marker and add sme drops of oil inside

[BiNumber3]

The bolt we see in the pic is a lvl7 stock classic bolt. If it's a lvl 10 bolt (and it should be, considering the other parts in the pic), it's a lvl 10 bolt, not an ANS Venturi (if it IS somehow a venturi, then something's wrong lol...) The Lvl 10 bolt also has a "foamie" at the tip, and at the rear, there should be a hollow tube protruding out, past the end of the bolt.

Double trigger or single is up to personal preference.

To add oil, just a couple drops into the ASA, and fire a couple shots, should be fine. I still have AGD oil, not sure what people recommend outside of that.

Only mod I'd really recommend at the moment, is get an On/Off ASA.

[juit]

well I finally cut the finger guard installed the double trigger, gas it up with a HP tank > no leaks, It shots sweet, the hose kinda bothers me

[Cyco-Dude]

well I finally cut the finger guard installed the double trigger, gas it up with a HP tank > no leaks, It shots sweet, the hose kinda bothers me

god, with all of the cut frames already out there, why would you do this to an uncut frame?

as for the hose, just get a longer piece of macroline and flip it forward. it'll be out of your way then. you might have to trim it a little so it's not over the foregrip though.

[juit]

hahahahahah , the hose gets in the way, I think Im gonna do a gas thru grip , is there any thing to move the grip 1 inch forward?

[alpha_q_up23]

Luke sells a foregrip extender, or you could always buy an RT length rail if you want to move the grip forward
Here's a link to Luke's Foregrip Extenders

[juit]

they look cool but they are raw

[Nobody]

Go down to the BST. There are 2 sections there: WTB(want to buy) and Misc parts. You can either do a search, or go through individual posts, looking for the parts you need. Or put up a post in the WTB for the piece you want, which i am sure someone might have, already anno'd.

Sometimes, it is that simple...

[Cyco-Dude]

hahahahahah , the hose gets in the way, I think Im gonna do a gas thru grip , is there any thing to move the grip 1 inch forward?

you mean you want something more like this?

[juit]

Wow that looks awesome