Classic RT with x-valve problem

[Redflag]

AC0D45B4-2D83-44F5-A504-90D28F103245.jpg
C14AA6A4-1FCC-42CB-9344-44CAC7C2A612.jpg
9E5D1D5D-F956-4CD9-A81D-F31DFAA0AFB7.jpg
09765E44-CAEC-491D-B826-63B6A8794CD7.jpg
CAB2338E-69C9-433D-9186-BD65FBBA5F5E.jpg
A492BDD0-9FF6-46A7-B678-BB4D433DD0CF.jpg
8F0D91A3-8C8A-4F9C-BCE7-F4F69647B535.jpg
68DF71D4-D815-48D6-B770-95DA94D4F857.jpg
C7D9D37E-2A85-466D-83E2-5D20F19B04FA.jpg

Original set up as it came from factory
Lvl 10 set up
Smallest carrier
No shims
Longest spring

Thanks!

[captian pinky]

[Redflag]

Yeah I realize it is an unconventional set up that's why I had to send it over to AGD so they could do the retrofit, it was a service they were offering at the time. Now I wish I had kept some documentation about the retrofit, I'm not familiar with the modification they needed to do or parts that may be different.

Now I do have a minimag at home I could use to troubleshoot, my ULE body/x valve should work on that right?

[captian pinky]

Yeah I realize it is an unconventional set up that's why I had to send it over to AGD so they could do the retrofit, it was a service they were offering at the time. Now I wish I had kept some documentation about the retrofit, I'm not familiar with the modification they needed to do or parts that may be different.

Now I do have a minimag at home I could use to troubleshoot, my ULE body/x valve should work on that right?

yes sir.

[Redflag]

Update, I noticed the brass shim for the field screw was missing from the marker so that was part of my initial problem. Now that that is in the marker fires normally but still have a small leak for the ULT on/off valve I believe. The reason I think it is the on/off is because I tried the on/off from a minimag and the leak stopped but the trigger was too reactive (run-away).

The ULT has 5 shims in it, I tried it with 3 and 4 shims and replace the bottom white o-ring but that did not solve the leak.

Also correction on my lvl 10 carrier size I have a #0 and for some reason that is the smallest one in my kit.

IMG_1868.jpg

Here is a video of my problem, as you can see the leak stop when the trigger is pulled.

https://www.youtube.com/watch?v=tZJps9_LAIY

Again any help would be very appreciated!
Thanks

[going_home]

[Tunaman]

You have to get rid of the long spring. These guns are too finicky using that spring. Use a red or gold spring and your carrier wont need to be so tight. There are 2 more smaller carriers now. I have them if you need them.