-
-
Luke used to offer a fix for them, he's long since discontinued that service
-
some have said that you dont have velocity issues with an xvalve only with classic valve. If I remember correctly when people say velocity issues was that they could not get above 280-300. Most fields around here cap velocity at 275-290 to have that little buffer and for insurance. so maybe not that big of an issue.
one of these days i have to pull my two brand new ones and try them out to see what results i get.Comment
-
I didn't have any with the one I had but usually with the velocity issues it was pretty much all valves.
Luke knows what to do to fix it but the secret has been locked in the vault of the masters of the universe, and no one has the power.....
Comment
-
I have no interest in being part of this conversation. But it's not brain surgery or unattainable information, if you want to know what the problems are with these bodies just reverse engineer it and then compare that to AGD specs. Or try to contact Forrest with PTP maybe he'll help, because its not my problem. That's the only answer you'll ever get out of me on the subject no matter how many times you mention it.Originally posted by going_home View PostLuke knows what to do to fix it but the secret has been locked in the vault of the masters of the universe, and no one has the power.....
Comment
-
Why is that? If you are not going to fix them then why dont you just spill the beans on how to do it. I would be interested myself...Originally posted by luke View PostI have no interest in being part of this conversation. But it's not brain surgery or unattainable information, if you want to know what the problems are with these bodies just reverse engineer it and then compare that to AGD specs. Or try to contact Forrest with PTP maybe he'll help, because its not my problem. That's the only answer you'll ever get out of me on the subject no matter how many times you mention it.Comment
-
This is not a Lc product so you should contact ProTeam Products, Forrest is still around.Originally posted by Tunaman View Post
Or you can pick up a Lc Micromag, I'll be glad to answer any questions you have on the Deflator.
The Deflator design was the MM2K9 that I wanted.
Deflator Green Black White Red a.jpgComment
-
Concerning the PTP MM2K9 bodies, I'm still guessing one of two things:
1. Bolt spring is over-compressed when installing valve. This pre-over-compression prevents higher velocities. Similar to installing red or gray spring on Level 10 without turning in the velocity adjuster to compensate.
2. Bolt releases air too far back in stroke. Too much air is lost up feed tube or elsewhere to propel the ball at higher velocities.
Or perhaps both. They may be connected. But I only have second-hand info to go on. I've never owned one. I just don't like the looks enough to veer from AGD products, which work (or have a large support network to get them to work when they seldom don't).Last of the Salzburg ClanComment
-
Originally posted by luke View PostThis is not a Lc product so you should contact ProTeam Products, Forrest is still around.
Or you can pick up a Lc Micromag, I'll be glad to answer any questions you have on the Deflator.
The Deflator design was the MM2K9 that I wanted.
[ATTACH=CONFIG]102905[/ATTACH]
OK, I'll try again 3? 5? years later. What dimensions differ on the Deflator vs. the MM2K9 that allow the Deflator to reach higher velocities than the MM2K9?
Last of the Salzburg ClanComment
-
The ones that matter, wouldn't you think? (lol)Originally posted by nak81783 View PostWhat dimensions differ on the Deflator vs. the MM2K9 that allow the Deflator to reach higher velocities than the MM2K9?Comment
-
We’ll talk in another 3-5 years.Originally posted by luke View PostLast of the Salzburg ClanComment
-
damn that is almost the colors i would want in one of your builds, only with the zframe.Originally posted by luke View PostThis is not a Lc product so you should contact ProTeam Products, Forrest is still around.
Or you can pick up a Lc Micromag, I'll be glad to answer any questions you have on the Deflator.
The Deflator design was the MM2K9 that I wanted.
[ATTACH=CONFIG]102905[/ATTACH]Comment
-
It's unfortunate for you that you ever fixed one of these.Originally posted by luke View PostI have no interest in being part of this conversation. But it's not brain surgery or unattainable information, if you want to know what the problems are with these bodies just reverse engineer it and then compare that to AGD specs. Or try to contact Forrest with PTP maybe he'll help, because its not my problem. That's the only answer you'll ever get out of me on the subject no matter how many times you mention it.
Because your name will be synonymous with the 2K9 micromag always like it or not.
Comment
-
Is that bad?Originally posted by going_home View PostIt's unfortunate for you that you ever fixed one of these.
Because your name will be synonymous with the 2K9 micromag always like it or not.
Comment
-
Not to me but you seem a bit put out every time this subject (and you in tandem with it) are mentioned.Originally posted by luke View PostIs that bad?
It's all good.
Comment
- AO: We are back from the dead... again! After an 18 day outage, we are finally alive and well. Who knew how complicated updating software/databases from 2008 would be. I still have alot of tweaks to make, but my main goal was getting everything patched and updated to 2026. Vbulletin 6 has changed alot since 2008 so we will have a ton of new features to dig into.
Comment