X-Valve Leaks

[Cdn_Cuda]

[vintage]

is the on off pin bent? ULT pins are prone to that.

[Cdn_Cuda]

[Tunaman]

Does it leak when you hold the trigger back after a shot?

[Cdn_Cuda]

No, pretty sure leak stops when trigger is pulled.

[Tunaman]

No, pretty sure leak stops when trigger is pulled.

If the leak stops when you hold the trigger back then the on/off is ok. Either change the powertube oring or spacer if L7 or go to a smaller L10 carrier using the same carrier oring. Remove all L10 shims if you have any in there. Let us know.

[Cdn_Cuda]

[Cdn_Cuda]

Alrighty, confirmed leak stops when trigger is pulled, but does minorly hiss and seems to stop. I removed the shins from the power tube, with seemingly no change. So it looks like I need to buy a set of carriers and change out the carrier in the power tube?

[Tunaman]

Alrighty, confirmed leak stops when trigger is pulled, but does minorly hiss and seems to stop. I removed the shins from the power tube, with seemingly no change. So it looks like I need to buy a set of carriers and change out the carrier in the power tube?

Yes. Pull the carrier out of the gun using the field strip screw and tell me what the markings on it are.

[Cdn_Cuda]

There are no markings on the carrier I have.

[Tunaman]

OK so you have a #0 carrier. You need to go to a #OO and use the same white oring that is in your present carrier. I have them if you need one. Email me at [email protected]

[Cdn_Cuda]

[Cdn_Cuda]

[nak81783]

[Cdn_Cuda]

I switch the trigger frame back to the original intelli-frame and it does not change the leak at all.