Power Feed Plug Adjustment & new vs old

[P-3]

the key ring is pretty clever. I'm definitely gonna use that. Thanks again.

[GhillieGuy]

I just got 2 of the new parapolic plugs for free from AGD
.. Does anyone know if they make um in alluminum?
thanks

[SecretAsianMan]

Hmm, a few questions I guess:

So they indeed work on Spyders? They sure look like it.

How much would they cost for me? Since I own a Spyder.. not a mag

How would I adjust them on a spyder? Just sand it down? I'm not totally understanding this. The plug covers up any part of the body that the balls could potentially get snagged on? When I examined my gun, only about 1/2 a millimeter of my body was "shelving" out. Is this cause for me to get this? But, my p/f plug is completely flat, so I guess the parabolic design would help anyway, eh?

Also, someone asked earlier if they came in aluminum or something metal, do they?

[Star_Base_CGI]

Originally posted by sneakyhacker420
EVERYONE WITH A SPYDER

GET ONE OF THE AGD PARABOLIC POWERFEED PLUGS


it will fit the spyder powerfeed port, and increases ball feed rate by ALOT

it kicks @$$ compared to that crappy slanded one that comes stock

You dont need to sand anything.

You need this.

http://store.airgun.com/acb/showdetl.cfm?&DID=17&Product_ID=86&CATID=6

$7.50


and this.

http://store.airgun.com/acb/showdetl.cfm?&DID=17&Product_ID=87&CATID=6

$2


You also have to drill a hole in the warp mount.

[the_next_guy_]

I have an old plug, and if I used large-bore paint, sometimes they would get stuck, so I chopped paint every 10th shot almost. To move the plug out a little, I put a piece of wire in between the powerfeed tube and the plug. That moved the plug out just enough to solve the problem.

[sneakyhacker420]

i meant slanted... lol... i posted here when i first joined AO

[68Classic]

i have the old plug, but i do not have any feeding problems.

[mcveighr]

I am in Canada, and requested one in the comments box on the registration form, do you think I'll get it?

[jobo_18]

At what ROF does this befome a problem? I have a Level 7 pf 'mag and i guess i can get somewhere around 10-12 bps, and i have never had a problem, with balls not feeding after i switched froma 9 to 12 volt revolution.

[ClouD]

is it possible for the new power feed to get worn out? It looks like i've had the new one for a while now and it looks kind of worn out.