Need some advice on a warp feed install

[Spootie]

I just got my blue AGD warp feed from modified paintball this afternoon and need a bit of help.

I have <a href="http://www.paintballkingdom.com/cgi-bin/cp/cp-app.cgi?usr=1134737&rnd=1504637&pg=store&sub_pg=pr od&ref=70"target="_blank">this low-rise vertical feed</a> on an Intimidator and nothing in the warp feed kit seems to fit it.

Am I supposed to remove the vertical feed altogether and use some third party feed that is compatible with the 90 degree adapter that came with the warp? Am I missing something painfully obvious in the kit?

Thanks for any help you can give!

[FrAuStY]

I don't have a low rise center feed gun.. but I have heard the if you remove the material where the screw is on the 90* adapter.. you can just cram the rest into your feed. The plastic reinforcement and screw should be removed.. you can eyeball if it will work or not. If you don't feel comfortable doing that.. just wait.. someone else may have had the same issue.

[hitech]

I would suggest that you replace the low rise feed with a low rise feed that requires an straight "elbow" that the warp 90 degree adapter will fit on. Overall that should work best.

[Spootie]

Originally posted by hitech
I would suggest that you replace the low rise feed with a low rise feed that requires an straight "elbow" that the warp 90 degree adapter will fit on. Overall that should work best.

Yes, I think that's the best (and probably cheapest) way to fix the problem.

I really appreciate all your suggestions!

[halo13]

If you go to www.pbnation.com and look in their intimidaor section you can find your answer. They have lost of "how to" threads and links.

[dyerules]

Don't mean to get of the subject.....

I would i run my warp to the standard feed on my 98 custom(back-up of course)???


Thanks!!!

[RobAGD]

take alook here for both M98 and Timmy warp hacks www.robagd.com

-Robert