Need some advice on a warp feed install

[Spootie]

I just got my blue AGD warp feed from modified paintball this afternoon and need a bit of help.

I have <a href="http://www.paintballkingdom.com/cgi-bin/cp/cp-app.cgi?usr=1134737&rnd=1504637&pg=store&sub_pg=pr od&ref=70"target="_blank">this low-rise vertical feed</a> on an Intimidator and nothing in the warp feed kit seems to fit it.

Am I supposed to remove the vertical feed altogether and use some third party feed that is compatible with the 90 degree adapter that came with the warp? Am I missing something painfully obvious in the kit?

Thanks for any help you can give!

[FrAuStY]

I don't have a low rise center feed gun.. but I have heard the if you remove the material where the screw is on the 90* adapter.. you can just cram the rest into your feed. The plastic reinforcement and screw should be removed.. you can eyeball if it will work or not. :) If you don't feel comfortable doing that.. just wait.. someone else may have had the same issue.

[hitech]

I would suggest that you replace the low rise feed with a low rise feed that requires an straight "elbow" that the warp 90 degree adapter will fit on. Overall that should work best.

[Spootie]

Originally posted by hitech
I would suggest that you replace the low rise feed with a low rise feed that requires an straight "elbow" that the warp 90 degree adapter will fit on. Overall that should work best.

Yes, I think that's the best (and probably cheapest) way to fix the problem.

I really appreciate all your suggestions!

[halo13]

If you go to www.pbnation.com and look in their intimidaor section you can find your answer. They have lost of "how to" threads and links.

[dyerules]

Don't mean to get of the subject.....

I would i run my warp to the standard feed on my 98 custom(back-up of course)???


Thanks!!!

[RobAGD]

take alook here for both M98 and Timmy warp hacks www.robagd.com

-Robert