AO: We are back from the dead... again! After an 18 day outage, we are finally alive and well. Who knew how complicated updating software/databases from 2008 would be. I still have alot of tweaks to make, but my main goal was getting everything patched and updated to 2026.
Vbulletin 6 has changed alot since 2008 so we will have a ton of new features to dig into.
i was reading the "Questions about a used 68AUTOMAG" thread and was wondering if i have a power tube spring instead of a solid spacer does that mean mine is a level 6 ... and what difference does it make?
thanks.
lvl 10 68 automag powerfeed CF17096
full freak aa front ss back
Clear Evolution II
wgp 2x frame w/wood formed panels
Shocktech chrome long drop
CP Bullet on/off Chrome
68 pure e steel 3k
low down gritty n grimey
No, when the level 7 mags came out they came with the spring. IIRC, it was a couple of years before the spacers started to appear (first as an aftermarket add-on).
Also IIRC, Level 6 mags had the power tube held on with a c-clip.
lvl 10 68 automag powerfeed CF17096
full freak aa front ss back
Clear Evolution II
wgp 2x frame w/wood formed panels
Shocktech chrome long drop
CP Bullet on/off Chrome
68 pure e steel 3k
low down gritty n grimey
Spacers allow you to "tweak your trigger" and also help cure leaks down the barrel and also bolt stick. You change them out with a shorter or longer one depending on the problems you're having.
Comment