? about automag classic

[novice]

If i bought a mainbody, intelliframe, and x-valve what else would i need other than a barrel to have a functional gun? I dont want to buy a automag classic and pretty much replace everything.

[Bulldog]

A rail, front screw, field strip screw, and a barrel. Tank, drop, and hopper too obvoiusly.

[novice]

i know i need a barrel, tank, and hopper. i have all that. i mean just the gun itself.

[redlaser666]

The only thing missing in your list is the rail, and the screws.

[DeathscytheSK]

Does the intelliframe come with a sear? if it doesn't then don't forget that

[digitard]

No the Intelliframe does not come with a sear..

1) Body Rail
2) Hex screws and valve screw
3) Trigger Sear
4) ASA *drop forward, ongun, air lines, etc*

Ummmm... I "think" that should do it

Sincerely,
Dave K

[vineas]

the x-valve comes with a sear ...

[novice]

So i would need a sear assembly, rail assembly, front frame screws, and a field strip bold. Somebody said a valve bolt but wouldnt the x-valve come with one?

[novice]

The x-valve does come with a sear, but i dont think a bolt. Does the intelliframe fit the classic? So pretty much the best be would be to buy a classic and upgrade from there. Oh by the way what do yall think about he classic?

[Derman2k]

The X Valve comes with a bolt...its the Level 10 bolt

[Bulldog]

Just to clarify: A rail, a front screw, and a field strip screw is all you need. No sear or bolt is needed, as they both come with the x valve. Hear's a pic to help out, hope that helps.

And by the way, the classic is a great vlave. The x is even better. My old classic valve lasted me 9 years.

[novice]

thank you bulldog, i think ill go with the classic.

[novice]

Oh i have another question. can you put a foregrip or expantion chanber on a classic.

[Derman2k]

Yes, you need to get a vertical adapter though.

[novice]

So either of them will fit on the factory slide. And the verticle adapter goes in the expantion chanber. Can i just run a air hose?