Leak through barrel with RTPro

[sneakyhacker420]

yeah... it sounds like a good time to use one of the two invisible stars on the retro

[FF7_SD_Masamune]

Improoving.

It's improoving....

Today I screwed in the tank, but this time when it was all the way in, the trigger pressurized at last, I shot it, and the leak stopped. However, after every 3-4 rapid shots, the trigger would de-pressurize, and eventually a moderate sized leak would start on the ASA.

I tried it again, same thing.

It takes like 10-30 minutes for the ASA leak to start, but the trigger de-pressurization thing started as soon as I shot it. After 3-4 shots, the trigger would de-pressurize, then after a couple seconds, it would repressurize.

Odd o_O.

Someone suggested that the reg was bad.

[vortechcoupe]

did you turn up the velocity since you had the lvl 7 in there?

Justin C

[FF7_SD_Masamune]

Originally posted by vortechcoupe
did you turn up the velocity since you had the lvl 7 in there?

Justin C

Haven't messed with the velocity at all ever... I'm confused though as to what you say, as I have always had my lvl 7 in o_O.

[vortechcoupe]

ok cool, i'm 99% sure you just need to turn it up. What spring are you using? With the brass one you don't need to a lot but with either of the silver ones at LEAST a half turn. Just go slow but don't be affaid, it takes a lot some times. This will fix the main problem. You still might have to adjust carriers and/or shims.

edit* do not send it in to AGD yet!!!*

Justin C