Help!!!! X Valve Wont Shoot!!!

[Dayspring]

That's a PERFECT way to get us to help.

Originally posted by maglover52
IT WONT SHOOT YOU RETARDS!!!!!!!

[maglover52]

well people dont get it through there head!!!! i have said it 50 times in this thread it wont shoot even the title. THE SEAR DOESNT POP FORWARD WHEN YOU PUT THE AIR ON AND IT WONT SLIDE FORWARD EVEN IF THE X VALVE IS ON!!!!!!! SO THERE FOR IT WONT SHOOT!!!!!

[Havoc_online]

haha, you sound like a smart enough guy(obivously smart enough to pull a valve out of a gassed up marker) help yourself.

[maglover52]

it wasnt gased up. the air tank was off of it. read the posts.

[Dayspring]

Well, you also would have read the Level 10 documentation that CLEARLY states that the LX kit holds pressure inside the valve unless a degassing measure is taken (proconnect, QD, slide check).

Also, when Havoc decides to help, you have one of the best techs around. DON'T get all nasty with people that are taking time out to help YOU. Just remember. All our guns are working.

[Miscue]

You'll find that people are more helpful when you're civil, and less helpful when you are not. We know it's frustrating when stuff doesn't work. Be patient and eventually you'll get it working.

[maglover52]

ijust gassed it up and it was leaking out the back and i have the 1 dot spacer in it with the medium spring and i pulled the trigger and it shot i did this a few times while it continued leaking. but then it just stoped and started leaking down the barrel? please help me!!!

[maglover52]

well agd needs to give you more o rings that go on the spacer i blew them all out i am gonna send this thing to agd and have them fix it because it is making me mad.

[Dayspring]

Um, why not take one from another carrier?

[Gadget]

I've just had the exact same problem with my X-Valve. Installed it into my classic mag, gassed up and nothing - sear pin didn't pop forward to rest behind the trigger.

I degassed, removed the valve, liberally oiled the on/off o rings, re-installed it and this time the sear did move. Then I just kept cranking the velocity adjuster nut up until the gun started firing.

Just need to wear it in and fine tune it now.

(Btw - this was with the 2 line carrier and 2 shims as per the instructions).

[la690]

how did you manage to blow everyone?

[paint magnet]

What's your output pressure from your tank? If it's preset at 450 it's not going to work. You need at least 650 psi into the valve for it to work well, higher is better.

Have you tried using a different tank?

[BlackVCG]

Send it to me and I'll fix it.

[maglover52]

no thanks im sending it ack to agd for them to do it.

[Ifortysixntwoi]

haha this guy wasnt the smartest was he?

it's not a big deal ... there are only a few reason why its not shooting ... u dont deserve the valve if u dont know how to work on it man ... peace ;-P