Problem with mag, First time using

[xen_100]

also, if you dont have LX, check to make sure you have a good PT o-ring in there. if it is bad, that can cause that leak.

if you do have LX, then try the next smaller carrier, or replace the carrier o-ring.

[i2ush]

ok

ok I replaced the spacer with a .215 i think. was a .220. and replaced all the orings in the pt. And i replaced all the orings in the on/off part. This got me stumped i have no clue what it is.

[xen_100]

is it still leaking out the barrel when you gas it up? but stops when you pull the trigger?

[i2ush]

eh

Hey i can't find anywhere where its leaking i cant feel no air just hear it alot. When i hold the trigger the air stop's leaking all the way. And when i let go it starts.

[xen_100]

well all I can say is to send it in for repair. if you replaced all the on-off o-rings (including the one around the bottom and the one inside the bottom) and you replaces the powertube o-ring, then I dont know.

[i2ush]

ok...

Ok the agd tech is not there right now till friday. Anyways now my gun is really acting wierd. When i put the air in, it starts leaking out of the back. And when i shoot it couple times it stops leaking out of the back and leaks down my barrel. hrm.. ;/. Anyone??

[xen_100]

well a leak out the back indicates acouple things.

1) you have the veloicty set too high
2) the reg piston o-ring is bad
3)the reg seat is not sealing and it causing the overpressure valve to blow.

I would replace all the o-rings and seals in the whole gun.(if you haven't already)

[i2ush]

YAY!!

OMG I LOVE YOU XEN! lol. Thank you alot. I never changed the piston O-ring. ITS ALL BETTER !!!!!!!!!!!!!!!!!!. its kinda lout though lol.

[xen_100]

glad to hear it is working.

it is prolly turned up too high after all the tinkering to get it to work. next time you play, you will prolly have to turn it down.