Hey everyone...a guy brought his used mag into the store yesterday and it had a couple of problems. The first is the classic feed neck broke clean off. I'm talking about seperated from the body without fragmenting or anything. What is the body made of so I can get it welded back on?
Also the marker is leaking. It switches between out the back velocity adjuster and down the barrel. It has been totally rebuilt and even has a brand new on/off "valve" in it. I took it apart and cleaned it (it didn't need to be) and it stopped leaking for about 10 seconds and then back again. If you drop the velocity down to about 190 it doesn't leak as bad but at 270 and above watch out. Also if I pull the trigger back it stops leaking but when I let it go it leaks again.
Help please.
Also the marker is leaking. It switches between out the back velocity adjuster and down the barrel. It has been totally rebuilt and even has a brand new on/off "valve" in it. I took it apart and cleaned it (it didn't need to be) and it stopped leaking for about 10 seconds and then back again. If you drop the velocity down to about 190 it doesn't leak as bad but at 270 and above watch out. Also if I pull the trigger back it stops leaking but when I let it go it leaks again.
Help please.


Comment