*sigh* not there yet. (need help please)

[athomas]

Here are the nubbins:

[tmnothing]

Alright I havn't had a chance to to anything this week but Friday and Saturday I'm gonna figure this out.

When I gas up the gun, pull the trigger, and hold it, I dont have any leaks. I assume the on/off assembly is working like it should be.

I'm going to clean the reg seat and the reg piston and see if that helps. I'm also going to go buy a bag of 500 marbs and try shooting those to see if my case of paint is causing the breaks. If I still have no luck I'm gonna call AGD and see what I can do about having my Reg Piston replaced.

Thanks guys your help is greatly appreciated. I should be able to figure this out now. Thanks again.

-AK

[tmnothing]

Alright I'm almost sure I figured out the problem. I took the reg off today and the reg seat stayed on the pin in the valve.... then it popped off. I cleaned off the seat, the reg, and the reg piston before I snapped the reg seat where it goes and put it back together. I aired up the gun and no leaking, I can even shoot with the medium spring instead of the small spring. I havn't tested it extensively but I shot about 100 balls and let the gun sit for about 5 mins and no leaks.

Also... I took some of my paint in question and shot them through my Model98 (I have Lapco Bigshots for my M98 and Minimag) and I broke 3 (barrel breaks not chops) when I was fanning... looks like the paint might be the prob.

Anyway once again thanks for all your help. I wouldnt have figured this out without you guys.

[xen_100]

he he.....I just love being right

glad you got it working.

[Digits]

baaah.. I have the same problem with the leaking out the velocity adjuster thing..

Now what I need to know is.. Where is the reg/reg piston located.. I just got my gun, and havn't had time to watch the video yet.. So help would be apreciated.

O, and I don't have a level 10 installed.

[xen_100]

time to watch the video


take the veloicty adjsuter out and the springpack. the regpiston is in there.

[Digits]

hehe im watching the video so I know now lol..

If I have the problem at the field tomrrow i'll have to clean it .

I just dont want to take it apart right now.. lol.. It's to late