Someone Help my gun work

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • zippy
    --------------------------
    • Mar 2003
    • 198
    #1

    Someone Help my gun work

    OK im having a little problem.
    I have a hyperframe/X-valve combo. When i first put it on a while ago it didn't work and someone on here told me i might need a longer on/off pin. So i got the longest one that Airgun makes and installed it int my valve.

    I gased it up and it still wouldn't shoot. The problem is not as bad though because i can make it shoot with a little help.

    On the back of the Hyperframe there is a little hole that gives you access to the sear so you can release the pressure in the valve to take you gun apart. If i put an allen key in the and puch i can manually fire the gun, so i know i have the right pressure and the valve is working fine.

    If i apply a small amount of pressure to the sear and then press the trigger i can get my gun to cycle using the Hyperframe. THe solenoid is as far back as it goes, do you think moving it foward might help? Or perhaps do i need yet a longer on/off pin? Or maybe my settings arent right on the timing of the frame? Can anyone help it ould be greatly appreciated.

    Sorry about the long post i just wanted to give as much detail as possible. Thanks

    "If if you believe in Psychokinetics, then raise my hand"
    "There are three kinds of people, those who can count, and those who can't"
    "We have enough youth, how about a fountain of smart"
    "What happens if you get scared half to death twice"
    "If we aren't supposed to eat animls, why are they made of meat?"
    "Ask me about my vow of silence"
    "I like you, but i wouldn't want to see you working with sub-atomic particals"
    Tags: None
    • personman
      #2
      I have never used a hyperframe before but in my micro emag (micros have longer pins than regular ones) I put the xvalve in and it acted like the pin was too short, even if I pulled it back all the way in manual.. so I took it back to the booth and brad pulled out a new on/off pin and took a file to it and stuck it in and it was fine.
      Whats happening to you sounds what happened to me, so why dont you mesure the pin with a caliper and then maybe look in the AGD online store and try to find a longer one or just call up AGD and tell them the problem..

        Comment

        • automagking182
          Method
          • Dec 2002
          • 299
          #3
          You need to get a on/off pin that was made by centerflag and you can do this by calling them at: 1-630-553-2611. i just ordered one and there customer service is excellent and everything so that would probably be your best bet. Good luck!

          Good Traders: Pnzrfst, NATO, Kai, buckwheat05


          *Official Automag Pictures*
          My Feedback

            Comment

            • hitech
              Not a shedder of vortices
              • Nov 2001
              • 4775
              #4
              Here is a link to my Hyperframe FAQ. You should adjust the solenoid as outlined in there.


              Hey Hitech your starting to sound like me! - AGD
              Hitech is the man.... :eek: - Blennidae
              The only Hitech Lubricant

                Comment

                • zippy
                  --------------------------
                  • Mar 2003
                  • 198
                  #5
                  Thanks for the fast response guys, i went on a wim and decided to put a shorter pin in and viola, it worked fine.

                  "If if you believe in Psychokinetics, then raise my hand"
                  "There are three kinds of people, those who can count, and those who can't"
                  "We have enough youth, how about a fountain of smart"
                  "What happens if you get scared half to death twice"
                  "If we aren't supposed to eat animls, why are they made of meat?"
                  "Ask me about my vow of silence"
                  "I like you, but i wouldn't want to see you working with sub-atomic particals"

                    Comment

                    Previous template Next
                    Working...